Buy Direct - Epoxy Adhesives, Resins, Fillers, Grouts
 
 As used by McAlpine and The National Trust
 

 

You can ring us now for Free Help - 01626 331351 - talk to Angela, David or Kathy - discuss your problem with a Qualified Expert

 

Go Direct to Order Form

Buy Now for Next Day Delivery - Nationally, by T.N.T.

Here are the answers to your repair and structural problems:

 

1. Fill a hole or slot by injection - THIXOTROPIC INJECTION KIT - standard and fast set option (for holes and slots in wood, masonry or metal - only moves when pushed - like Vaseline in consistency)

2. Fill a hole or slot by pouring - STRUCTURAL GROUT - standard and fast set option (for holes and slots in wood, masonry, metal or to form machine bases, plinths - self levelling)

3. Surface fill a small split/crack/hole- RAYCRETE - in timber, masonry or plaster - filler/adhesive - (two creams, pine colour, can be coloured with our Tinta Powder - expands slightly on setting, easy to sand)

4. Fill a hole or split by hand placing - MOULDABLE MORTAR -(like window putty in consistency, can be formed, shaped, sanded, painted - totally non-shrink)

5. Consolidate/seal/prime timber, masonry or plaster - EPOXY PRIMER - (a thin liquid, use alone as a surface sealer or as a primer for Mouldable Mortar on poor surfaces)

6. Repair metal, wood & masonry components - EPOXY PUTTY STICKS - concentric stick of two part, rapid setting putty - break off and mould together in the gloved hand

7. Bond floor tiles, slate and timber flooring - ULTRA FLOORING ADHESIVE -on timber, screed, concrete - filler/adhesive - (two grey creams, easy to mix and spread - no shrinkage, totally waterproof, flexes)

8. Bond floor tiles, slate and timber flooring - ULTRA FLOORING GROUT/ADHESIVE -on timber, screed, concrete - filler/adhesive and grout in one product - (two white creams, easy to mix and spread - no shrinkage, totally waterproof, flexes)

9. Seal concrete floors - EPOXY SEAL COATING - on screed, concrete, slate, tiles, slabs - liquid seal coating - (two liquids, easy to mix and spread - no shrinkage, vapour barrier, totally waterproof, flexes)

"The best range of repair materials that we have ever used - I wouldn't use anything else" - Tony Loades, professional Treatment Specialist (Devon)

Let us help you choose the correct solution to your problem - don't waste money on unecessary treatments or products.

 

 

BULK DISCOUNTS AVAILABLE - BUY IN BOXED QUANTITIES

ALL ORDERS GO OUT SAME DAY - GUARANTEED

 

 

1. Injecting Thixotropic Epoxy

Injecting Epoxy into Slots

2. Pouring Structural Epoxy Grout

3. Raycrete for crack filling and bonding

6. Epoxy Putty Sticks

Contact us at: 01626 331351 or help@propertyrepairsystems.co.uk

Go Direct to Order Form

For more timber repair information go to: www.timber-repair.co.uk


Structural Epoxy Pouring Grouts -

Structural Epoxy Pouring Grout - 1.0, 2.5 and 8 litre

A three part epoxy grout, supplied as two liquids and separate aggregate, in a large plastic mixing tub. Designed for pouring into holes and voids in timber and concrete. Ideal for use with Epoxy/Glass, Carbon and Steel bars and plates, as part of a composite, reinforced repair structure.

Structural Epoxy Pouring Grout in a floor strength upgrade slot

Go Direct to Order Form

Example of Structural Epoxy Pouring Grout in use - reinforcement of large decayed beam

A Manor House carrier beam at first floor level had suffered from Wet Rot and Death Watch Beetle over many years, resulting in loss of strength extending from the bearing end. By careful placing of epoxy coated steel re-bar (BS4449) to our Design the loss of long grain strength could be made up with multiple connectors, the Structural Epoxy Pouring Grout then completing the composite, reinforced repair structure.

Complex beam repair awaiting pouring of Grout


Structural Epoxy Pouring Grout as part of a Timber-Resin Splice Repair to a small joist

Joist Ends - the joist ends above an occupied flat were badly affected by Dry Rot.. These were replaced with TYPE C Timber-Resin Splice Units which consist of new, pre-manufactured timbers to match the original, with pre-bonded epoxy coated steel re-bar connectors. The pouring resin here is in a two pack, 1 litre pot, for small repairs.

Joist end Timber-Resin Splice repair during pouring

Go Direct to Order Form

For more technical information go to: www.timber.org.uk


Thixotropic Injection Resin

Thixotropic Injection Resin - 400cc and 1.0 litre

A two part thixotropic epoxy resin, supplied as two stiff gels, in mixing pots suitable for directly filling plastic disposable cartridges. Designed for injection of cracks, splits and voids in timber and concrete. Ideal for use with Epoxy/Glass, Carbon and Steel bars and plates, as part of a composite, reinforced repair structure. Available as standard and Slow Set versions.

Injection of Thixotropic Resin into a shuttered slot (400cc cartridge in standard skeleton gun

Go Direct to Order Form

Rapid Setting version available - 6-8 minutes

Example of Thixotropic resin in use - injection of splits in a visible rafter

An exposed rafter had dried out and split in the attic room of the schoolmaster's house in the historic Sherbourne School, resulting in loss of strength. The splits were first hand packed with Mouldable Mortar, using a pallet knife, then Thixotropic Epoxy Injection Resin was forced in via temporary injection nozzles using a skeleton gun and cartridge, completing the composite, reinforced repair structure.

 

 

 

Mouldable Epoxy Mortar filling, followed by Injection of thixotropic resin via injection flange

Property Repair Systems
Unit 3 Olympus Business Park
Newton Abbot, Devon, TQ12 2SN
T: 01626 331351
F: 01626 331143
E: help@propertyrepairsystems.co.uk