>
 
Repair Joists - from above or below - ceiling or floor in place
 
 As used by The National Trust, Schools, Churches & Listed Buildings owners
 

 

You can ring us now for Free Help - 01626 331351 - talk to Angela, David or Kathy - discuss your problem with a Qualified Repair Expert (C.R.D.S. + C.T.I.S.)

Buy Now for Next Day Delivery - Nationally, by T.N.T.

WANT AN INSTANT REPAIR TO DOMESTIC JOISTS

BUY A 'Bower Beam' JOIST REPAIR KIT' (JRK)

Direct from our Warehouse - ring 01626 331351 - these Kits allow you to fix rotted joist ends in minutes - NO RESIN, NO WAIT, NO MESS -

 

Where you cannot use a Joist Repair Kit, here is the answer to your problem:

The Timber-Resin Splice (TRS)

Avoid lifting the floor boards or dropping the ceiling:

* made to fit your joists

* any length, width or depth

* treated with Boron, for long life

* Guaranteed for the life of the Parent timber

"The best way to save ceilings and floors that we have ever used - I wouldn't use anything else" - Tony Loades, professional Treatment Specialist (Devon)

Don't destroy perfectly good ceilings or rip up good flooring - Ring for Free Technical Support Now -

call: 01626 331351 for a 'Real Person' to chat about your needs, and Order Direct by phone

OR

Go Direct to Order Form

 

Let us help you choose the correct solution to your problem - don't waste money on unecessary treatments or products.

 

.

For more technical information go to: www.timber-repair.co.uk

Bower Beam Joist Repair Plates in use

 

 

Joist end Timber-Resin Splice repair during pouring

Joist Ends - the joist ends above an occupied flat were badly affected by Dry Rot.. These were replaced with TYPE C Timber-Resin Splice Units which consist of new, pre-manufactured timbers to match the original, with pre-bonded epoxy coated steel re-bar connectors. The pouring resin here is in a two pack, 1 litre pot, for small repairs


Structural Epoxy Pouring Grouts -

Structural Epoxy Pouring Grout - 1.0, 2.5 and 8 litre

A three part epoxy grout, supplied as two liquids and separate aggregate, in a large plastic mixing tub. Designed for pouring into holes and voids in timber and concrete. Ideal for use with Epoxy/Glass, Carbon and Steel bars and plates, as part of a composite, reinforced repair structure.

Structural Epoxy Pouring Grout in a floor strength upgrade slot

Go Direct to Order Form

Example of Structural Epoxy Pouring Grout in use - reinforcement of large decayed beam

A Manor House carrier beam at first floor level had suffered from Wet Rot and Death Watch Beetle over many years, resulting in loss of strength extending from the bearing end. By careful placing of epoxy coated steel re-bar (BS4449) to our Design the loss of long grain strength could be made up with multiple connectors, the Structural Epoxy Pouring Grout then completing the composite, reinforced repair structure.

Complex beam repair awaiting pouring of Grout


Structural Epoxy Pouring Grout as part of a Timber-Resin Splice Repair to a small joist

Joist Ends - the joist ends above an occupied flat were badly affected by Dry Rot.. These were replaced with TYPE C Timber-Resin Splice Units which consist of new, pre-manufactured timbers to match the original, with pre-bonded epoxy coated steel re-bar connectors. The pouring resin here is in a two pack, 1 litre pot, for small repairs.

 

Go Direct to Order Form

For more technical information go to: www.timber.org.uk

 

 

 

 

Joist end Timber-Resin Splice repair during pouring

 

 

 

 

Property Repair Systems
Unit 3, Olympus Business Park, Kingsteignton Road
Newton Abbot, Devon, TQ12 2SN
T: 01626 331351
F: 01626 331143
E: help@propertyrepairsystems.co.uk