Epoxy Flooring Adhesive - 10kg

A two part epoxy resin, supplied as two smooth pastes in plastic tubs. Designed for waterproof, flexible bonding of tiles, timber flooring and panels, plastic, metal and concrete. Ideal for all types of flooring laid onto concrete. Waterproof, forming a 'membrane' as it bonds. It will bond onto a damp surface.

Go Direct to Order Form

Thixotropic Injection Resin - 400cc and 1.0 litre

A two part thixotropic epoxy resin, supplied as two stiff gels, in mixing pots suitable for directly filling plastic disposable cartridges. Designed for injection of cracks, splits and voids in timber and concrete. Ideal for use with Epoxy/Glass, Carbon and Steel bars and plates, as part of a composite, reinforced repair structure. Available as standard and Slow Set versions.

Injection of thixotropic resin into a shuttered slot (400cc cartridge in standard skeleton gun

Go Direct to Order Form

A Manor House carrier beam at first floor level had suffered from Wet Rot and Death Watch Beetle over many years, resulting in loss of strength extending from the bearing end. By careful placing of epoxy coated steel re-bar (BS4449) to our Design the loss of long grain strength could be made up with multiple connectors, the Structural Epoxy Pouring Grout then completing the composite, reinforced repair structure.

Injection of thixotropic resin via injection flanges

Laminating - the original, historic oak beam had been badly attacked by Wet Rot and Death Watch Beetle at one bearing end. This was replaced with a TYPE E Timber-Resin Splice Unit, which consisted of new, pre-manufactured timber to match the original, with pre-bonded epoxy coated steel re-bar connectors. The thixotropic resin was used in production for lamination of the kiln dried oak.

Oak Timber-Resin Splice (TRS) unit being laminated from new kiln dried Oak

Laminating - the original, historic oak beam had been badly attacked by Wet Rot and Death Watch Beetle at one bearing end. This was replaced with a TYPE E Timber-Resin Splice Unit, which consisted of new, pre-manufactured timber to match the original, with pre-bonded epoxy coated steel re-bar connectors. The thixotropic resin was used in production for lamination of the kiln dried oak.

Oak Timber-Resin Splice (TRS) - connection bars being fitted

Masonry Injection - the plaster/render coating over a Tanking system had cracked and de-laminated due to excessively fast shrinkage during drying-out - the central heating had been turned on full blast! To avoid decanting the offices of staff and computers, the cracks were hand drilled and carefully injected using small syringes filled with thixotropic resins.

De-laminated render being injected via holes drilled through the filled cracks

Polyurethane Bonding Resin - 1.0 litre and 400cc cartridge

A one part polyurethane resin, supplied as either a honey-like liquid in a bottle or as a smooth paste in a cartridge. Designed for ultra fast bonding of timber, plastic, metal and concrete. Ideal for fast production of a strong bond. Moisture curing. It will bond onto a damp surface. Available as standard and Slow Set versions.

Decorative arch repair piece - mouldings fast bonded with Polyurethane Bonding Resin

Go Direct to Order Form

For more technical information go to:.timber.org.uk