Epoxy Resins - call us for free advice

E Mail:help@propertyrepairsystems.co.uk

Property Repair Systems

01626 331351

Here are the answers to your repair and structural problems:

1. INJECTION - to fill a hole or slot by injection - THIXOTROPIC INJECTION KIT - standard and fast set option (for holes and slots in wood, masonry or metal - only moves when pushed - like Vaseline/Swarfega in consistency)

View Prices and to buy now - click to go to our Shop

2. POURING - to fill a hole or slot by pouring - STRUCTURAL POURING RESIN - standard and fast set option (for holes and slots in wood, masonry, metal or to form machine bases, plinths - self levelling)

View Prices and to buy now - click to go to our Shop

3. FINE CRACK FILLING - surface fill a small split/crack/hole- RAYCRETE - in timber, masonry or plaster - filler/adhesive - (two creams, pine colour, can be coloured with our Tinta Powder - expands slightly on setting, easy to sand)

View Prices and to buy now - click to go to our Shop

4. OPEN CRACK OR HOLE FILLING - to fill a hole or split by hand placing - MOULDABLE EPOXY PUTTY MORTAR - (like window putty in consistency, can be formed, shaped, sanded, painted - totally non-shrink)

View Prices and to buy now - click to go to our Shop

5. PRIME - Consolidate/seal/prime timber, masonry or plaster - EPOXY PRIMER - (a thin liquid, use alone as a surface sealer or as a primer for Mouldable Mortar on poor surfaces)

View Prices and to buy now - click to go to our Shop

6. SEAL and WATERPROOF - seal concrete floors - EPOXY SEAL COATING - on screed, concrete, slate, tiles, slabs - liquid seal coating - (two liquids, easy to mix and spread - no shrinkage, vapour barrier, totally waterproof, flexes)

View Prices and to buy now - click to go to our Shop

7. BOND - to bond floor tiles, slate and timber flooring - ULTRA FLOORING ADHESIVE -on timber, screed, concrete - filler/adhesive - (two grey creams, easy to mix and spread - no shrinkage, totally waterproof, flexes)

View Prices and to buy now - click to go to our Shop

BULK DISCOUNTS AVAILABLE - BUY IN BOXED QUANTITIES

ALL ORDERS GO OUT SAME DAY - GUARANTEED

See examples of Projects incorporating some of these materials below.

Structural Epoxy Pouring Resin - 1.0, 2.5 and 8 litre

A three part epoxy, supplied as two liquids and separate aggregate, in a large plastic mixing tub. Designed for pouring into holes and voids in timber and concrete. Ideal for use with Epoxy/Glass, Carbon and Steel bars and plates, as part of a composite, reinforced repair structure.

Structural Epoxy Pouring Resin in a floor strength upgrade slot

Go Direct to Order Form

A Manor House carrier beam at first floor level had suffered from Wet Rot and Death Watch Beetle over many years, resulting in loss of strength extending from the bearing end. By careful placing of epoxy coated steel re-bar (BS4449) to our Design the loss of long grain strength could be made up with multiple connectors, the Structural Epoxy Pouring resin then completing the composite, reinforced repair structure.

Complex beam repair awaiting pouring of resin

Joist Ends - the joist ends above an occupied flat were badly affected by Dry Rot.. These were replaced with TYPE C Timber-Resin Splice Units which consist of new, pre-manufactured timbers to match the original, with pre-bonded epoxy coated steel re-bar connectors. The pouring resin here is in a two pack, 1 litre pot, for small repairs.

Joist end Timber-Resin Splice repair during pouring

Go Direct to Order Form

For more technical information go to: www.timber.org.uk

Thixotropic Injection Resin - 400cc and 1.0 litre

A two part thixotropic epoxy resin, supplied as two stiff gels, in mixing pots suitable for directly filling plastic disposable cartridges. Designed for injection of cracks, splits and voids in timber and concrete. Ideal for use with Epoxy/Glass, Carbon and Steel bars and plates, as part of a composite, reinforced repair structure. Available as standard and Slow Set versions.

Injection of Thixotropic Resin into a shuttered slot (400cc cartridge in standard skeleton gun

Go Direct to Order Form

An exposed rafter had dried out and split in the attic room of the schoolmaster's house in the historic Sherbourne School, resulting in loss of strength. The splits were first hand packed with Mouldable Mortar, using a pallet knife, then Thixotropic Epoxy Injection Resin was forced in via temporary injection nozzles using a skeleton gun and cartridge, completing the composite, reinforced repair structure.

Epoxy adhesives, together with epoxy putty, epoxy primer and epoxy pouring resins form part of our extensive range of epoxy and polyester resins. They can be used for epoxy floor coating, typically concrete sealing from dampness, epoxy structural repair of holes and cracks and floor bonding bars and bolts into masonry, often referred to as chemical anchoring. For further help call us for free technical advice.

Home | Repair Cracks| Brick Adhesives | Chemical Anchors | Coatings | Repair Concrete |Repair Render | Returns Policy | Contact