or

Use our Shopping Cart

click the item to add it to your cart

JOIST REPAIR PRODUCTS

Bower Beam - Joist Repair Plate Kit (6 inch) 150mm Cut-Off- two specially drilled L shaped plates complete with coach screws, all zinc plated to Supergalv standard, fits joists from 6"x 2" - 10"x 4"

Bower Beam - Joist Repair Plate Kit (9 inch) 225mm Cut-Off - two specially drilled L shaped plates complete with coach screws, all zinc plated to Supergalv standard, fits joists from 6"x 2" - 10"x 4"

Bower Beam - Joist Repair Plate Kit (17 inch) 430mm Cut-Off- two specially drilled L shaped plates complete with coach screws, all zinc plated to Supergalv standard, fits joists from 6"x 2" - 10"x 4"

Timber-Resin Splice Kit - Unlimited Cut-Off - made to measure timber ends with connector bars pre-bonded into one end, supplied with resins for fixing

DRY ROT TREATMENT PRODUCTS

Boron Ultra 12 - 2.5kg - for surface treatment of medium to heavy woodworm infestation, Death Watch Beetle, Dry and Wet Rot, 2.5kg makes 25 litres of working solution

Boron Ultra Gel 2.5 litre - for higher concentration surface treatment and end grain protection where the timber has become wet and is vulnerable to attack

Boron Ultra 78 Paste - for injection into timber, to prevent and kill Death Watch Beetle, Dry Rot and Wet Rot

Boron Rods 8mm x 24mm - to add to paste, inside timber, where permanent or seasonal dampness is likely, to provide a long term reservoir of Boron

Boron Rods 8mm x 65mm - longer version of above, larger diameters also available for garden posts, wall plates, railway sleepers and bonding timbers.

Also, for common furniture beetle by spray or brush:

Boron Ultra 12 - 1kg - for surface treatment of light woodworm infestation, 1kg of powder makes 25 litres of working solution

Other products in our range:

STRUCTURAL RESINS AND FILLERS

Structural Epoxy Pouring Grout, 3 pack, 2.5 litre - for pouring into structural timbers/masonry & for shuttered repairs

Structural Epoxy Pouring Grout, 3 pack, 8 litre - for pouring into structural timbers/masonry & for shuttered repairs

Thixotropic Injection/Bonding/Lamination Resin, 2 pack, 400cc - for injecting into cracks/splits, bonding bars into holes, laminating

Moulding Mortar, 2 pack, 1litre - hand mouldable epoxy for filling holes in timber & masonry

Primer liquid, 2 pack, 500cc - for use with Moulding Mortar

Raycrete filler, 2 pack, 12 fl.oz foil pack - quick setting, easily sandable, all purpose filler

Polyester Paste, 2 pack, 500cc - quick setting paste for sealing shutters, cracks and splits

TOOLS AND ANCILLARIES

3D Cutter - 25mm x 110mm (EWL) - for drilling holes and cutting slots

3D Cutter - 25mm x 250mm (EWL) - (extended shaft) - for drilling deeper holes and cutting slots

Auger Extension - adds 200mm

Chisel for slot clearance - all steel 14 inch x 30mm

Complete Tool Kit - Augers, 3D Cutters, Chisels, etc. - Hire/week

Metabo Drilling Machine - low speed, reversible, - Hire/week

Paper Towel Roll -for clean up of tools

Vinyl Gloves - Box of 100 x 1

Pallet knife - square edged, stiff, for resin mixing

STRUCTURAL CACULATIONS AND WARRANTY

Structural Check Calculation - proves beam repair = strength

Full Structural Calculation - proves beam/repair = actual load by qualified independent Structural Engineer

Manufacturers Guarantee Certificate - per job