Main Marine applications - voids in hulls and masts (in conjunction with Epoxy Glass Bars).

A three part, (two liquids and a powder) thick pouring resin. Mix using a mixing paddle in an electric drill. For filling holes and, in combination with glass reinforcement rods, for structural repair of hull structures, including GRP and concrete. Self levelling, self de-gassing.

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4").

Frequently purchased with this product - Mixing Paddle, 1 litre Cartridge Tube Kit, 1 litre Skeleton Gun.

£34.65 1 litre, £62.83 2.5 litre, £128.85 7.5 litre, plus VAT

Buy 1 litre - - Buy 2.5 litres - - Buy 7.5 litres

Marine Thixotropic Epoxy Injection & Laminating Resin - 400cc, 1 litre - single tube - hand mix

Slow Set option - gives over 2 hours working time

Main Marine applications - injection and bonding in hulls and masts (plus Epoxy Glass Bars).

A two part, (two pastes) thick injection resin. Mix using a pallet knife, by hand. For laminating and bonding materials together. In conjunction with a Cartridge Tube kit, for injecting into slots and holes and, in combination with reinforcement rods, for structural repair of hull structures, including GRP, timber, steel and concrete. Also used as an anchor resin, to bond rods, studs, bolts and reinforcement into GRP, timber, steel and concrete.

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A 400cc pack will fill a hole 25mm in diameter to a depth of 800mm. Extension tubes are available, made to order, to reach the base of any hole depth and in varying diameters.

Frequently purchased with this product - Pallet Knife, 400cc Cartridge Tube Kit, 400cc Skeleton Gun, 1 litre Cartridge Tube Kit, 1 litre Skeleton Gun, Vinyl Gloves (Box of 100).

Standard and Slow Set - £26.86 400cc, £35.89 1 litre, both require a Cartridge (at extra cost) if being used for injection, rather than spreading

Buy Standard Set 400cc resin - - Buy Standard Set 1 litre resin -

Buy Slow Set 400cc resin - - Buy Slow Set 1 litre resin -

Buy Pallet knife - Buy box of gloves -

Main Marine applications - bonding anchors into harbour walls and concrete boats.

For rapid setting injection - 6 to 8 minutes, in a single plastic cartridge. Simply insert into a standard skeleton gun and screw on the mixing tube. Inject gently, like putting paste on your toothbrush, from the bottom of the hole outwards. Can be used for anchors, bolts, studs and stitching into harbour walls, rock and other concrete structures.

Usage rate - 280cc will fill a 10mm x 100mm slot for a length of 280mm (a typical 'stitch' repair would be 225mm long).

Frequently purchased with this product - 400cc Professional Skeleton Gun, Spare Mixing Nozzles, Vinyl Gloves.

Thixo Rapid Resin 280cc - £15.76 per single tube with one mixing nozzle, £12.61 per tube in a box of 10, with one mixing nozzle, £0.65 per spare mixing nozzle, plus VAT

Buy 1 to 9 single tubes of Thixo Rapid 280cc -

Buy a Box of 10 tubes of Thixo Rapid 280cc -

Buy Spare Mixing Nozzles -

Buy Box of 100 Disposable Vinyl Gloves -

Main Marine applications - fixing components into holes in hulls and masts.

For hole injection to secure an anchor bolt, bar or threaded bar - Chemical Anchor Resin, supplied in a dual piston, side by side plastic cartridge. Simply insert into a 1:1 ratio skeleton gun and screw on the mixing tube. Inject from the bottom of the hole outwards. Can be used for anchors, bolts, studs and threaded bar - suitable for use with steel, stainless steel, aluminium, wood and concrete.

Usage rate - 380cc will fill 8 x 20mm diameter holes to a depth of 150mm, assuming maximum wastage.

Frequently purchased with this product - 1:1 Skeleton Gun, Vinyl Gloves, Spare Mixing Nozzles

Chemical Anchor Resin - £9.85 per 380cc cartridge including mixing nozzle, plus VAT

Buy 380cc resin -

Buy box of gloves - Buy spare mixing nozzles -

For repairs to metal, concrete and wood - Marine Pure Epoxy Resin, supplied in a dual piston, side by side plastic cartridge. Simply insert into a 1:1 ratio skeleton gun and screw on the mixing tube. Inject from the bottom of the hole outwards or spread onto mating surfaces. Can be used for anchors, bolts, studs and stitching - suitable for use with steel, stainless steel, aluminium, wood and concrete.

Usage rate - 380cc will fill 8 x 20mm diameter holes to a depth of 150mm, assuming maximum wastage. For surface bonding or lamination allow a minimum of 1 litre per square metre, assuming a thickness of 1mm.

Frequently purchased with these products - 1:1 Skeleton Gun, Vinyl Gloves, Spare Mixing Nozzles

Pure Epoxy Resin - £18.42 per 380cc cartridge including mixing nozzle, plus VAT

Buy 380cc resin twin cartridge -

Buy a box of gloves - Buy spare mixing nozzles -

Marine Epoxy Mouldable Putty - 1 litre - 1:1 mix ratio - hand mix

Main Marine applications - filling holes in GRP and wood (with Epoxy Primer)

Simply take equal portions in gloved hands and mix together, like window putty or bread dough, until a perfectly even colour. Apply with a pallet knife or by hand placing. Ideal for repairs to hulls and fixing in GRP, wood, steel and concrete.

Usage rate - 1 litre of putty will fill a hole 4 inches x 4 inches x 4 inches (100mm x 100mm x 100mm).

Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed vinyl)

Epoxy Mouldable Putty - £12.62, per 500cc supplied as 2 x 250cc pots, £18.38 per litre, supplied in 2 x 500cc pots, £64.78 for 5 litres, supplied as 2 x 2500cc pots, plus VAT

Buy 500cc of putty -

Buy 1 litre of putty -

Buy 5 litres of putty -

Buy Pallet Knife for mixing/placing -

Buy Box of 100 Vinyl Disposable Gloves -

Epoxy/Glass Bars - cut from 1 metre or 3 metre lengths

Available in 6, 8, 10, 13, 16mm diameters

Zinc Plated High Tensile Steel Allthread - cut from 3 metre lengths

Available in 12, 16, 20, 25mm diameters

Helical Stainless Steel Bar

Available in 6mm diameter, 1 metre or 2 metre lengths

£4.88 per metre, supplied in 1 metre lengths, plus VAT

6mm x 1 metre

Priced by Telephone to suit your project - supplied cut to length - call 01626 331351

Glass Rods for strengthening - Helical Stainless Steel Bar

400cc - 250mm/10 inches long tube, with piston and pointed nozzle

1000cc - 250mm/10 inches long tube, with piston and pointed nozzles

Frequently purchased with this product - 400cc or 1000cc Skeleton Gun, Extension Injection Tubes - ring us to discuss your exact requirements

£1.95 400cc tube kit, £4.25 1000cc tube kit, plus VAT

Buy a 400cc tube kit - Buy a 1000cc tube kit -

400cc Skeleton Gun - for injection using UltraCure 400cc and all other products in single tubes, 280cc to 400cc

1000cc Skeleton Gun - Special 1 Litre gun for injection using UltraCure 1000cc or other 1 Litre products.

380cc 1:1 Skeleton Gun - gun for injecting Anchor Resin and similar 1:1 side by side resin cartridges

£16.50 400cc gun, £26.98 1000cc (1 litre) gun, £28.90 380cc/1:1 mix ratio, plus VAT

400cc gun 1000cc gun 380cc/1:1 gun pallet knife box of gloves

Main Marine applications - GRP hull sealing, Concrete boat deck and hull sealing. Not for use where it will be exposed to UV light. Ideal for below the waterline, inside lockers and beneath teak decking.

Water and solvent free.

Waterproofs, seals and provides a tough vapour barrier membrane on all hull materials. Apply by brush or roller. Pure epoxy - no solvents, no water.

Usage rate - allow between 1 square metre per litre (rough surfaces) and 2.5 square metres per litre (smooth surfaces)

Colours - Red = RAL3013, Grey = RAL7042.

Ultra Epoxy Seal coating - Clear - £27.88 per 1 litre, £48.92 per 2.5 litres, £83.85 per 5 litres.

Ultra Epoxy Seal coating - Red or Grey - £29.89 per 1 litre, £52.88 per 2.5 litres, £91.99 per 5 litres.

Buy Epoxy Seal Coating Clear - 5 litre -

Buy Epoxy Seal Coating Clear - 2.5 litre -

Buy Epoxy Seal Coating Clear - 1 litre -

Buy Epoxy Seal Coating Red - 5 litre -

Buy Epoxy Seal Coating Red - 2.5 litre -

Buy Epoxy Seal Coating Red - 1 litre -

Buy Epoxy Seal Coating Grey - 5 litre -

Buy Epoxy Seal Coating Grey - 2.5 litre -

Buy Epoxy Seal Coating Grey - 1 litre -

Main Marine applications - priming surfaces to take Mouldable Epoxy Putty filler

Water and solvent free.

Provides a secure bond on GRP, wood, metal, concrete. Apply by brush or roller. Pure epoxy - no solvents, no water. Apply the repair resin (e.g. Mouldable Putty) into the repair while the Epoxy Primer is still tacky.

Usage rate - allow between 1 square metre per litre (rough surfaces) and 2.5 square metres per litre (smooth surfaces)

Colours - Clear - other colours to Order

£18.20 500cc, plus VAT

Buy 500cc Primer - Buy pallet knife - Buy box of gloves -

Main Marine applications - For repairing cracks in concrete hulls and harbour walls.

The Kit contains: 10 x 1 metre lengths of Helical Bar, 3 litres of W60 Flexi Grout, Injection Applicator Gun, Pointing Tool and Mixing Paddle.

Usage rate - will form up to 20 x 500mm horizontal stitches in brickwork, for example

£96.50 - complete Kit, plus VAT

Buy Crack Repair Kit

Main Marine applications - repairing principal hull structural timbers.

For repairing structural hull timbers. These bespoke beam kits contain a new, laminated structural timber, made in kiln dried wood to C24 Grade or higher, fitted with connector bars made from zinc plated 8.8 Grade High Tensile Allthread bar. Pouring or injection resins are also included.

Engineering - free Design, Method Statement and Tools List (Hire available).

Frequently purchased with this product - additional Structural Pouring Resin

£ POA - price on application, Free Quotation - call Angela or Andy on 01626 331351

.