A three part, (two liquids and a powder) thick pouring resin. Mix using a mixing paddle in an electric drill. For filling holes and, in combination with reinforcement rods, for structural repair of timber and masonry, including concrete. Self levelling, self de-gassing (bubbles of air, trapped during mixing, will rise to the top and escape)

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A hole 300mm x 300mm x 300mm (1ft x 1ft x 1ft) will require 27 litres.

Frequently purchased with this product - Mixing Paddle, 1 litre Cartridge Tube Kit, 1 litre Skeleton Gun.

Structural Epoxy Pouring Resin - £34.65 1 litre, £62.83 2.5 litre, £128.85 7.5 litre, plus VAT

Buy 1 litre of Pouring Resin -

Buy 2.5 litres of Pouring Resin -

Buy 7.5 litres of Pouring Resin -

Buy Mixing Paddle -

Buy 1 litre Cartridge Kit -

Thixotropic Epoxy Injection & Laminating Resin - 400cc and 1 litre - single tube - hand mix with a pallet knife

Slow Set option - extend your working time to over 2 hours

Type - a two part, (two gel pastes) thick injection resin. This resin does not drip or run - it is similar in consistency to Vaseline or Swarfega.

Mixing - mix using a pallet knife, by hand.

Uses:

1. For injecting into cracks, slots and holes, when used with a Cartridge Tube Kit.

2. For laminating and bonding materials together, by spreading.

3. In combination with reinforcement rods, for structural repair of timber and masonry, including concrete.

4. As an anchor resin, to bond rods, studs, bolts and reinforcement into masonry and concrete.

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A 400cc pack will fill a hole 25mm in diameter to a depth of 800mm. Extension tubes are available, made to order, to reach the base of any hole depth and in varying diameters.

Frequently purchased with this product - Pallet Knife, 400cc Cartridge Tube Kit, 400cc Skeleton Gun, 1 litre Cartridge Tube Kit, 1 litre Skeleton Gun, Vinyl Gloves (Box of 100).

Thixotropic Injection and Laminating Resin - £26.86 400cc, £35.89 1 litre - standard or slow set.

Note - both require a Cartridge (at extra cost) if being used for injection, rather than spreading.

Buy Standard Setting Thixotropic Resin - 400cc -

Buy Slow Setting Thixotropic Resin - 400cc -

Buy Standard Setting Thixotropic Resin - 1 litre -

Buy Slow Setting Thixotropic Resin - 1 litre -

Buy Pallet Knife for mixing -

Buy Box of 100 Vinyl Disposable Gloves -

Grit for Brake Testing Rollers

16 Grit - 1mm to 2mm grit size - £3.07 per kilo -

12 Grit - 2mm to 3mm grit size - £3.07 per kilo -

Mixed Grit - 1mm to 3mm grit sizes - £3.47 per kilo -

Thixo Rapid is a nozzle mixing two part product for rapid setting injection - 3 to 8 minutes, in a single plastic cartridge. Simply insert into a standard skeleton gun and screw on the mixing tube. Inject gently, like putting paste on your toothbrush, from the bottom of the hole outwards. Can be used for anchors, bolts, studs and stitching in masonry.

Usage rate - 280cc will fill a 10mm x 100mm slot for a length of 280mm (a typical 'stitch' repair would be 1000mm long).

Frequently purchased with this product - 400cc Professional Skeleton Gun, Spare Mixing Nozzles, Vinyl Gloves.

Thixo Rapid Resin 280cc - £15.76 per single tube with one mixing nozzle,£12.61 per tube in a box of 10, with one mixing nozzle, £0.65 per spare mixing nozzle, plus VAT

Buy 1 to 9 single tubes of Thixo Rapid 280cc -

Buy a Box of 10 tubes of Thixo Rapid 280cc -

Buy Spare Mixing Nozzles -

Buy Box of 100 Disposable Vinyl Gloves -

Chemical Anchor Polyester Resin - for hole injection to secure an anchor bolt, bar or threaded bar - , supplied in a dual piston, concentric cartridge. Simply insert into a concentric type skeleton gun and screw on the mixing tube. Inject from the bottom of the hole outwards. Can be used for anchors, bolts, studs and stitching in masonry - suitable for use with steel, stainless steel, aluminium, brick, stone and render.

Usage rate - 380cc will fill 8 x 20mm diameter holes to a depth of 150mm, assuming maximum wastage, where you fill the hole, rather than allow for the resin that will be displaced by the bar or bolt, and only part fill the hole.

Frequently purchased with this product - 10:1 Concentric Skeleton Gun, Vinyl Gloves, Spare Mixing Nozzles

Polyester Anchor Resin - £9.85 per 380cc twin tube concentric cartridge, including mixing nozzle, plus VAT

Buy Chemical Anchor 380cc resin -

Buy a Box of 100 Vinyl Disposable Gloves -

Spare Mixing Nozzles -

Buy Skeleton Gun, Concentric 10:1 for AnchorSet -

Pure Epoxy Resin - for repairs to metal, masonry and wood - supplied in a dual piston, side by side plastic cartridge. Simply insert into a 1:1 ratio skeleton gun and screw on the mixing tube. Inject from the bottom of the hole outwards or spread onto mating surfaces. Can be used for anchors, bolts, studs and stitching in masonry, bonding and laminating - suitable for use with steel, stainless steel, aluminium, brick, stone and render.

Usage rate - 380cc will fill 8 x 20mm diameter holes to a depth of 150mm, assuming maximum wastage where you fill the hole, rather than allow for the resin that will be displaced by the bar or bolt, and only part fill the hole. For surface bonding or lamination allow a minimum of 1 litre per square metre, assuming a thickness of 1mm.

Frequently purchased with these products - 1:1 Skeleton Gun, Vinyl Gloves, Spare Mixing Nozzles

Pure Epoxy Resin - £18.42 per 380cc cartridge including mixing nozzle, plus VAT

Buy Pure Epoxy Resin - 380cc -

Buy Box of 100 Vinyl Disposable Gloves -

Buy Spare Mixing Nozzles -

Buy Skeleton Gun - 380cc, Side by side 1:1 for Pure Epoxy -

Epoxy Mouldable Putty - 1 litre and 500cc - 1:1 mix ratio - hand mix

Simply take equal portions in gloved hands and mix together, like window putty or bread dough, until a perfectly even colour. Apply with a pallet knife or by hand placing. Repairs wood, brick, stone, concrete, some plastics and bonds most metals. Will set underwater.

Usage rate - 1 litre of putty will fill a hole 4 inches x 4 inches x 4 inches (100mm x 100mm x 100mm).

Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed vinyl)

Epoxy Mouldable Putty - £12.62, per 500cc supplied as 2 x 250cc pots, £18.38 per litre, supplied in 2 x 500cc pots, £64.78 for 5 litres, supplied as 2 x 2500cc pots, plus VAT

Buy 500cc of putty -

Buy 1 litre of putty -

Buy 5 litres of putty -

Buy Pallet Knife for mixing/placing -

Buy Box of 100 Vinyl Disposable Gloves -

Timbabuild - wooden frame repairs - e.g. window frames, door frames

Repair window frames, door frames, timber frames with TIMBABUILD or TIMBABUILD RAPID. Designed for window frame care and repair, this filler/adhesive consists of two soft, creamy materials, gunned to give a perfect mix ratio. Mix with a putty knife. There is no shrinkage and it is totally waterproof. This is a professional repair material, as used by window frame repair specialists.

Usage rate - 380cc will fill a 10mm x 100mm slot for a length of 380mm

Frequently purchased with this product - 380cc Skeleton Gun, Spare Mixing Nozzles, Vinyl Gloves, Epoxy Primer.

Timbabuild Rapid Set - £27.87 per tube, plus VAT -

Timbabuild Standard Set - £26.98 per tube, plus VAT -

Timbabuild Skeleton Gun,

for Rapid or Standard Set - £28.90, plus VAT -

Epoxy Primer, 500cc - £18.20, plus VAT -

Box of 100 gloves - £10.97, plus VAT -

Epoxy Primer is always specified for smooth timber, planed timber and all hardwoods.

However, on rough or well dug out softwood timber it is not strictly required.

Ensure that ALL rotted wood is cut out completely. Filling over rot is a waste of money.

Finish the job off with our Boron Paste and Boron Rods - these provide internal protection by dissolving inside. See our Boron Shop for details.

Dispensing Timbabuild Standard Set for mixing - skeleton gun gives precise mix ratio for consistent results.

Applying Timbabuild - easy to form, smooth and sand.

Brushing Epoxy Primer -

apply Timbabuild whilst the primer is still sticky.

Epoxy/Glass Bars - cut from 1 metre or 3 metre lengths

Available in 6, 8, 10, 13, 16mm diameters

Zinc Plated High Tensile Steel Allthread - cut from 3 metre lengths

Available in 12, 16, 20, 25mm diameters

Helical Stainless Steel Bar

Available in 6mm diameter, 1 metre or 2 metre lengths. Each 1 metre length will make one typical brickwork or blockwork 'stitch'.

Helical Bar - £4.88 per metre, supplied in 1 metre lengths, plus VAT

Buy Helical Bars - 6mm x 1 metre -

Priced by Telephone to suit your project - supplied cut to length - call 01626 331351

Example of High Tensile Zinc Plated Allthread used to join components inside a repair.

These Cartridge Kits are supplied empty ready to hand fill with our Structural Epoxy Pouring Resin (by pouring) or with our Thixotropic Injection Resin by using the 'pusher plate' supplied with the Kit. The pusher plate drops into the pot containing the mixed resin and allows the open end of the tube to be pushed down into the pot, filling itself as it goes down.

400cc - 250mm/10 inches long tube, with piston and pointed nozzle

1000cc - 250mm/10 inches long tube, with piston and pointed nozzles

Frequently purchased with this product - 400cc or 1000cc Skeleton Gun, Extension Injection Tubes - ring us to discuss your exact requirements

Cartridge Tube Kits - £1.95 400cc tube kit, £4.25 1000cc tube kit, plus VAT

Buy 400cc Cartridge Tube Kit -

Buy 1000cc Cartridge Tube Kit -

You can specify the length of extension tube that you require. They are available in the following diameters: outer tube diameter - 8mm, 10mm and 15mm. (Other sizes - specially made to order).

Extension Nozzles - for cartridge tubes - 400cc or 1 litre fitting

Extension Nozzles - 8mm diameter (OD) - 400mm long - for 400cc Tube - £4.65 -

Extension Nozzles - 10mm diameter (OD) - 400mm long - for 400cc Tube - £4.85 -

10mm diameter (OD) - 400mm long - for 1 Litre Tube - £6.25 -

Extension Nozzles - 15mm diameter (OD) - 400mm long - for 400cc Tube - £7.50 -

15mm diameter (OD) - 400mm long - for 1 Litre Tube - £7.50 -

400cc Cartridge Extension Tube, 10mm diameter

1 Litre Cartridge Extension Tube, 10mm diameter

400cc Skeleton Gun - for injection using UltraCure 400cc and all other products in single tubes, 280cc to 400cc

1000cc Skeleton Gun - Special 1 Litre gun for injection using UltraCure 1000cc or other 1 Litre products.

380cc 10:1 Skeleton Gun - gun for injecting Chemical Anchor Polyester Resin and similar 10:1 concentric twin tube resin cartridges

380cc 3:1 Skeleton Gun - gun for injecting Pure Epoxy Resin and similar 1:1 side by side resin cartridges

Skeleton Gun - £16.50 400cc gun, £26.98 1000cc (1 litre) gun,

Twin Tube Skeleton Gun - £25.00 Concentric tubes, 380cc/10:1 mix ratio, plus VAT

Twin Tube Skeleton Gun - £28.90 Side by side tubes, 380cc/1:1 to 3:1 mix ratio, plus VAT

Buy Skeleton Gun - 310/400cc - single tube -

Buy Skeleton Gun - 1000cc - single tube -

Buy Skeleton Gun - 380cc/10:1 - Concentric single tube, dual piston -

Buy Skeleton Gun - 380cc/1:1 to 3:1 gun, Side by side, dual tube & dual pistons -

Buy Pallet Knife -

Buy Box of 100 Vinyl Disposable Gloves -

Tools - 3D Cutters - deep hole and slot cutting

A high speed tool for use in electric drilling machines. The 3D Cutter drills holes, cuts slots and can be dragged sideways to clean out previously rough drilled or cut out slots or holes.

25mm diameter x 110mm length - - £24.40 plus VAT

32mm diameter x 110mm length - - £25.83 plus VAT

Extended length versions:

25mm diameter x 250mm length - - £38.50 plus VAT

32mm diameter x 250mm length - - £39.77 plus VAT

Tools - All Metal Chisels - deep slot clearance

All Metal Chisels, made of solid steel, can be used with lump hammers and as levers, to clean out slots and tidy up previously roughly cut out cavities in wood.

Standard length;

30mm wide - - £19.87 plus VAT

Extended length

30mm wide - - £39.87 plus VAT

3D Cutter - standard length

250mm extended version also available

All Steel Chisel - standard length 14 inches - also available extended

Liquid Membranes - waterproof brush on coating, indoors & outdoors

Epoxy Seal Coating - 1 litre, 2.5 litre, 5 litre - colour choice

Waterproofs, seals and provides a tough vapour barrier membrane on concrete, render, stone, brick and quarry tiles. Apply by brush or roller. Pure epoxy - no solvents, no water.

Ultra Epoxy Seal coating is perfect for sealing damp concrete floors, damp screeds, damp slab and tiled floors, to prevent the passage of moisture and moisture vapour.

Can be used to prepare old or new concrete or screeded floors for direct laying of wooden floors. It acts as a complete vapour barrier.

Use our Grit in the top coat to provide a rough surface for adhesive, if you intend fitting a tiled or bonded flooring of any kind.

Coverage Rate - up to 2.5 square metres per litre on smooth surfaces.

Colours - Red = RAL3013, Grey = RAL7042.

Ultra Epoxy Seal coating - Clear - £27.88 per 1 litre, £48.92 per 2.5 litres, £83.85 per 5 litres.

Ultra Epoxy Seal coating - Red or Grey - £29.89 per 1 litre, £52.88 per 2.5 litres, £91.99 per 5 litres.

Buy Epoxy Seal Coating Clear - 5 litre -

Buy Epoxy Seal Coating Clear - 2.5 litre -

Buy Epoxy Seal Coating Clear - 1 litre -

Buy Epoxy Seal Coating Red - 5 litre -

Buy Epoxy Seal Coating Red - 2.5 litre -

Buy Epoxy Seal Coating Grey - 5 litre -

Buy Epoxy Seal Coating Grey - 2.5 litre -

Buy Epoxy Seal Coating Grey - 1 litre -

Grit for making Epoxy Seal Coat ready for tiling adhesive

16 Grit - 1mm to 2mm grit size - £3.07 per kilo -

12 Grit - 2mm to 3mm grit size - £3.07 per kilo -

Mixed Grit - 1mm to 3mm grit sizes - £3.47 per kilo -

UV Resist Clear Coating - Polyurethane Based - use indoors and outdoors - one pack

Ultra UV Resist coating is perfect for sealing damp concrete floors, damp screeds, damp slab and tiled floors, to prevent the passage of moisture and moisture vapour.

Can be used to prepare old or new concrete or screeded floors for direct laying of wooden floors. It acts as a complete vapour barrier.

Coverage Rate - up to 5 square metres per litre on a smooth surface

Ultra UV Resist Clear coating - Clear - £18.65 per 1 litre, £46.88 per 2.5 litres

Buy UV Resist Clear coating - 1 litre -

Buy UV Resist Clear coating - 2.5 litre -

Primes and consolidates timber, concrete, brick stone and render.

Provides a secure bond on wood, metal, concrete, render, stone, brick and quarry tiles. Apply by brush or roller. Pure epoxy - no solvents, no water. Apply the repair resin (e.g. Mouldable Putty) into the repair while the Epoxy Primer is still tacky.

Usage rate - allow between 1 square metre per litre (rough surfaces) and 2.5 square metres per litre (smooth surfaces)

Colours - Clear - other colours to Order

Epoxy Primer/Consolidator - £18.20 500cc, £27.88 1 litre, plus VAT

Buy Primer/Consolidator - 500cc -

Buy Primer/Consolidator - 1 litre -

Buy pallet knife for mixing - - Buy box of 100 disposable gloves -

For repairing cracks in masonry and concrete.

The Kit contains: 10 x 1 metre lengths of Helical Bar, 3 litres of W60 Flexi Grout, Injection Applicator Gun, Pointing Tool and Mixing Paddle.

Usage rate - will form up to 10 x 1000mm horizontal stitches in brickwork, for example

Complete Crack Repair Stitching Kit - £96.50 - complete Kit, plus VAT

Buy Crack Repair Kit -

For repairing timber beams, lintols, rafters, tie beams, carrier beams, joists and bressumers. These bespoke beam kits contain a new, laminated structural timber, made in kiln dried wood to C24 Grade or higher, fitted with connector bars made from zinc plated 8.8 Grade High Tensile Allthread bar. Pouring or injection resins are also included.

Engineering - free Design, Method Statement and Tools List (Hire available).

Frequently purchased with this product - additional Structural Pouring Resin

£ POA - price on application, Free Quotation - call Angela or Andy on 01626 331351

Have a look at full details of the Timber-Resin Splice System at:

www.timber.org.uk and www.timber-repair.co.uk

.