Resins Shopping Page

Property Repair Systems - 01626 331351 - speak to real resins people

ALL PRICES ARE SHOWN EXCLUDING VAT

Click here for our Home Page

Click here to look at our Epoxy Resins choice by Job Type

 

 

 
     

Click to view your Shopping Basket


Injection and Pouring Resins

Pouring - Structural Epoxy Resin - Structural Pouring Grout -

Injection Resin - Cracks, Holes & Slots - Structural Thixotropic Resin - Injectors, use for narrow cracks -

Rapid Set Injection and Bonding Resin - Cracks, Holes & Slots -

Putty for Filling Cracks - Structural Epoxy Putty - Epoxy Primer/Consolidating Liquid, Clear -

Flooring & Tiling, Epoxy Adhesive Paste - Hole Filling - Epoxy Patch Mortar Kit

Injection Resin - Anchor Resin - Injection Resin - Polyurethane Liquid -

Crack Repair Stitching Kit for Walls - Repair Kit for Hollow or Cracked Tiles


Coatings

Clear Outdoor Water Repellent Wall Coating -

Epoxy Clear and Coloured Epoxy Coatings for floors - Grits for tiling or self leveling over on floors -


Accessories, Tools, Grit, Epoxy Cleaner

Cartridge Tubes - Syringes - Extension Nozzle Tubes - Skeleton Guns -

Colouring Additives - Resin Remover Fluid -

Grits for making Anti Slip Surfaces, or re-gritting Brake Rollers and Potato Peelers

Slot Cutting Tool - Slot Cutting Chisel -


Timber Repair

Timber Repair Methods - Surface Fine Filling - Timbabuild -

Putty for Filling Cracks - Structural Epoxy Putty -

Joining using Rods & Bars


Cement - Polymer Based System

Tanking Powder - Joint Sealing Powder - Crack Filling Powder - Bonding Liquid


REPAIR KITS

Tiles - Cracked or Hollow - Injection Kit

Concrete Patching - Concrete Hole Injection - Fixing Studs - Crack Filling - Inject Hollows - Rust Treatment

Render Crack Filling - Inject Hollows - Brick Crack Stitching - Brick Crack Filling

Eco Paint Stripper - Black Epoxy Putty

Stone Repair - Self Leveling Hole Repair - Gravestone Repair

Plaster Ceiling and Cornice Repair Kit

Wood Hole Filling - Wood Split Stitching

List of Links to Help Pages


DESCRIPTION

PRODUCT

PRICES & SIZES




Epoxy Pouring Resin

Structural pour-on self leveling epoxy resins, for repairs and casting, plus machine bases and bearing pads.

Optional Grout version (thicker) - this has the same structural properties as the Pouring Resin, but is thicker. Call us to discuss your job and we may then advise the thicker option.

Click here for more information.

Sizes - 1 litre, 2.5 litre and 7.5 litre kegs.

Two versions - Resin or Grout - supplied as three part, thick porridge like pouring resins (two liquids and a powder).

Uses - for filling holes and, in combination with reinforcement rods, for structural repair of timber and masonry, including concrete. Self leveling, self degassing (bubbles of air, trapped during mixing, will rise to the surface and escape)

Mixing - mix using a paddle in an electric drill.

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A hole 300mm x 300mm x 300mm (1ft x 1ft x 1ft) will require 27 litres.

Frequently purchased with this product - Mixing Paddle, 1 litre Cartridge Tube Kit, 1 litre Professional Skeleton Gun, Epoxy Remover Fluid.

 

Pouring Structural Epoxy Resin

7.5 Litre Bucket of Epoxy Pouring Resin

 

This size can be mixed as 3 x 2.5 litre packs.

Site mixing Structural Epoxy Pouring Resin with a paddle in an electric drill

Site mixing - use a paddle in an electric drilling machine to mix all three parts, - two clear liquids and a powder.

Structural Epoxy Pouring Resin

Buy 1 litre of Pouring Resin - £34.65 -

Buy 2.5 litres of Pouring Resin - £62.83 -

Buy 7.5 litres of Pouring Resin - £128.85 -

Buy Mixing Paddle -

Buy 1 litre Cartridge Kit -

Shuttering 670mm x 550mm - £12.50 -

Shuttering Release Wax -

 

Epoxy Remover Fluid

Buy 250cc can - £5.99 -

For the thicker Grout option call us on 01626 331351 to discuss your application - we'll help you choose the correct product.

 

 

 

 

 




Thixotropic Injection and Laminating Resin

A two part, (two gels) thick injection resin. This resin does not drip or run - it is similar in consistency to Vaseline or Swarfega. Mixes to a grey/buff colour, but colour powder or pigment can be added.

Sizes - 400cc and 1000cc (1 litre)

Uses:

1. For injecting into cracks, slots and holes, when used with a Cartridge Tube Kit.

2. For laminating and bonding materials together, by spreading.

3. For MOT Brake Roller re-coating, in combination with our Grits.

4. In combination with reinforcement rods, for structural repair of timber and masonry, including concrete.

5. As an anchor resin, to bond rods, studs, bolts and reinforcement into masonry and concrete.

Mixing - mix using a pallet knife, by hand.

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A 400cc pack will fill a hole 25mm in diameter to a depth of 800mm. Extension tubes are available, made to order, to reach the base of any hole depth and in varying diameters.

Frequently purchased with this product - Mixing Knife, 400cc Cartridge Tube Kit, 400cc Skeleton Gun, 1 litre Cartridge Tube Kit, 1 litre Skeleton Gun, Vinyl Gloves (Box of 100).

 

 

 

 

 

 

 

Thixotropic Resin Colours before mixing

Brightly coloured base allows easy mixing.

Cartrdide Kit for Resin - 400ccCartridge Kit for Resin - 1000cc

400cc Cartridge Kit/1 litre Cartridge Kit

Skeleton Gun - professional quality

Skeleton Gun for Injection - 400cc version.

Brake Roller and Blinding Grit

Brake Roller

and General Purpose Blinding Grit

Thixotropic Injection/Laminating Resin

Note - both require a Cartridge (at extra cost) if being used for injection, rather than spreading.

Standard Setting

Buy 400cc - £26.86 -

Buy 1 litre - £35.89 -

Slow Setting

Buy 400cc - £26.86 -

Buy 1 litre - £35.89 -

Buy Pallet Knife for mixing -

Buy Professional Gun - £16.50 -

Buy Box of 100 Gloves -

Click here to go to Cartridge Tubes Section, if you need to inject the product.

Epoxy Remover Fluid

Buy 250cc can - £5.99 -


Grit for Brake Testing Rollers

16 Grit - 1mm to 2mm grit size

Buy 16 Grit - £3.07 per kilo -

12 Grit - 2mm to 3mm grit size

Buy 12 Grit - £3.07 per kilo -

Mixed Grit - 1mm to 3mm grit sizes

Buy Mixed Grit - £3.47 per kilo -




Thixotropic Rapid Injection Resin

Thixo Rapid is a nozzle mixing two part product for rapid setting injection - 3 to 8 minutes, in a single plastic cartridge. Fits a standard skeleton gun, ideal for bonding and injection.

Sizes - 310cc single cartridge (yields 280cc)

Uses - can be used for anchors, bolts, studs and stitching in masonry, render and concrete crack repair. Ideal for fast brick bonding, or re-fixing bricks before repointing

Mixing - simply insert into a standard skeleton gun and screw on the mixing tube. Inject gently, like putting paste on your toothbrush, from the bottom of the hole outwards.

Usage rate - 280cc will fill a 10mm x 100mm slot for a length of 280mm (a typical 'stitch' repair would be 1000mm long).

Frequently purchased with this product - 400cc Professional Skeleton Gun, Spare Mixing Nozzles, Vinyl Gloves.


Polyurethane Rapid Injection Resin

A brown liquid, runny honey consistency, which expands and fills holes and cracks. Moisture curing.

Sizes - 1000cc (1 litre)

Uses - can be used for injection of concrete cracks and hollow sections

Mixing - none required. Pour straight into a 10cc, 20cc or 50cc Syringe (with no needle attached) and directly inject into a 5mm hole.

Usage rate - 1 litre will fill a hole up to 10 litres in volume, due to the product's expansion when in contact with moisture.

Frequently purchased with this product - 50cc Syringes, , Vinyl Gloves.

 

Injecting Thixor rapid into wall cracks

Injection of crack with Thixo Rapid

Thixo Rapid Mixing Nozzles

Spare Mixing Nozzles for Thixo Rapid

 


Syringes are used to inject Polyurethane

 

Thixo Rapid Resin 280cc

Purchase 1 to 9 single tubes of Thixo Rapid

Buy 280cc - £15.76 -

Buy Professional Skeleton Gun - £16.50 -

 

When purchased in boxes of 10

Buy 280cc - £12.61 -

Buy Spare Mixing Nozzles -

Buy Box of 100 Disposable Vinyl Gloves -


Polyurethane Rapid Injection Resin

Buy 1 litre bottle -

Injection requires syringes:

Buy 10cc Syringe - £0.52 -

Buy 20cc Syringe - £0.60 -

Buy 50cc Syringe - £1.50 -

Plugs, to cap 10mm diameter holes

£3.96 - pack of 25, dark brown -

£3.96 - pack of 25, brick red -

£3.96 - pack of 25, limestone/buff -

 




Chemical Anchor Polyester Resin

A two part Polyester resin for anchoring bars and bolts into masonry.

For hole injection to secure an anchor bolt, bar or threaded bar - , supplied in a standard 400cc cartridge.

Size - contents 380cc, single cartridge

Uses - can be used for anchors, bolts, studs and stitching in masonry - suitable for use with steel, stainless steel, aluminium, brick, stone and render.

Mixing - simply insert into a standard type skeleton gun and screw on the mixing tube. Inject from the bottom of the hole outwards.

Usage rate - 380cc will fill 8 x 20mm diameter holes to a depth of 150mm, assuming maximum wastage, where you fill the hole, rather than allow for the resin that will be displaced by the bar or bolt, and only part fill the hole.

Frequently purchased with this product - 400cc Skeleton Gun, Vinyl Gloves, Spare Mixing Nozzles

 

 

 


Pure Epoxy Resin

A two part Epoxy resin for anchoring bars and bolts into masonry.

For repairs to metal, masonry and wood - supplied in a dual piston, side by side plastic cartridge.

Size - 380cc twin tube cartridge

Mixing - simply insert into a 1:1 ratio skeleton gun and screw on the mixing tube. Inject from the bottom of the hole outwards or spread onto mating surfaces.

Uses - can be used for anchors, bolts, studs and stitching in masonry, bonding and laminating - suitable for use with steel, stainless steel, aluminium, brick, stone and render.

Usage rate - 380cc will fill 8 x 20mm diameter holes to a depth of 150mm, assuming maximum wastage where you fill the hole, rather than allow for the resin that will be displaced by the bar or bolt, and only part fill the hole. For surface bonding or lamination allow a minimum of 1 litre per square metre, assuming a thickness of 1mm.

Frequently purchased with these products - 1:1 Professional Skeleton Gun, Vinyl Gloves, Spare Mixing Nozzles

 

Polyester Anchor Resin

Spare spiral mixing nozzles

 


 

Pure Epoxy Resin - twin side by side tubes

supplied with spiral mixing nozzles

Pure Epoxy Resin for injection into holes

This products needs the 1:1 Side by side,

Twin Piston Skeleton Gun

 

Polyester Anchor Resin 380cc

Buy Chemical Anchor - £15.86 -

Buy a Box of 100 Gloves -

Spare Mixing Nozzles -

Buy professional skeleton gun - £16.50 -

 

 

 

 

 

 

 

 

 

 

 

 

 


 

Pure Epoxy Resin 380cc

Buy Pure Epoxy Resin

Buy 380cc - £28.65 -

Buy Box of 100 Vinyl Disposable Gloves -

Buy Spare Mixing Nozzles -

Buy Skeleton Gun - for Pure Epoxy -

Epoxy Remover Fluid

Buy 250cc can - £5.99 -

 

 

 

 

 




Epoxy Putty

Waterproof repair putty, which can be coloured, moulded, shaped, sanded and painted. It can also be used like a mortar, to fill cracks and holes in masonry, or as a glazing putty for windows. Repairs stone - can be shaped to repair statues and mouldings.

Click for more information.

Sizes - 500cc and 1000cc (1 litre)

Uses - fills and structurally repairs wood, brick, stone, concrete, some plastics and bonds most metals. Will set underwater.

Mixing - simply take equal portions in wetted gloved hands and mix together, like window putty or bread dough, until a perfectly even colour. Apply with a pallet knife or by hand placing. Use a wetted seam roller to smooth.

Usage rate - 1 litre of putty will fill a hole 4 inches x 4 inches x 4 inches (100mm x 100mm x 100mm).

Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed vinyl), Epoxy Remover Fluid, Smoothing Roller, Pallet Knife, Colour Powder.

 

Epoxy Putty - a Mouldable Mortar Filler

Mixing Epoxy Putty

Hand mix in the gloved hand 1:1.

Mixed ball of Epoxy Putty

Ready to place into a hole or crack.

Epoxy Mouldable Putty

Buy 500cc of putty - £12.62 -

Buy 1 litre of putty - £18.38 -

Buy Pallet Knife for mixing/placing -

Buy Box of 100 Vinyl Disposable Gloves -

Colouring Powder 50g - black -

Colouring Powder 50g - brown -

Colouring Powder 50g - red -

Colouring Powder 50g - white -

Epoxy Remover Fluid

Non flammable - 250cc can - £5.99 -

 

Click for Accessories section to see other useful extras.




Timbabuild

A two part Epoxy filler for fine surface filling of window frames. Easy to smooth to a precise shape. Can be sanded and painted.

Size - 380cc twin tube cartridge

Uses - repair window frames, door frames, timber frames or other wooden structures.. Can be used as an adhesive to bond timber pieces into frames.

Mixing - this filler/adhesive consists of two soft, creamy materials, gunned to give a perfect mix ratio. Mix with a putty knife. There is no shrinkage and it is totally waterproof. This is a professional repair material, as used by window frame repair specialists.

Usage rate - 380cc will fill a 10mm x 100mm slot for a length of 380mm

Frequently purchased with this product - Professional 380cc Skeleton Gun, Spare Mixing Nozzles, Vinyl Gloves, Epoxy Primer.

 

Dispensing Timbabuild Standard Set

Dispensing Timberbuild ready for mixing

Applying Timbabuild

Easy to form, smooth and sand.

Spreading Timberbuild

Timbabuild Rapid & Standard

Buy Rapid Set - £27.87 per tube -

Buy Standard Set - £26.98 per tube -

Buy Skeleton Gun - £28.90 -

 

Skeleton gun gives precise mix ratio for consistent results.

Finish the job off with our Boron Paste and Boron Rods - these provide internal rot and insect attack protection by dissolving inside the timber. See our Boron Shop for details.

Epoxy Remover Fluid

Buy 250cc can - £5.99 -




Injectors, for narrow cracks and hidden voids

Plastic hammer-in injectors incorporating one way valves.

Requires a syringe with a 4mm diameter outlet.

Hole Size - 10mm diameter x 40mm

Uses - for injecting various resins deep into wood, concrete, brick, render or stone.

Ensure that ALL dust is blown or vacuumed out completely. Injection into dust does not work.

Fitting - drill holes at least 40mm deep if you want to flush fit the Injector. Remove all dust from the holes. After injection the Injector can be knocked in further, drilled out or left exposed - fill over using Epoxy Putty, or insert our Plastic Plugs to give a flush finish.

Usage rate - typically, insert one Injector every 100mm to 150mm.

Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed vinyl), Syringes, Plugs, Epoxy Remover Fluid, Epoxy Putty.

Syringes required for injection

Sizes - 10cc, 20cc and 50cc. Outlet outside diameter 4mm.

Uses

Measuring - for dosing liquid Epoxies, such as Epoxy Primer, to maintain the correct mix ratios (keep one syringe with each part - Activator and Base).

Injecting - for injecting liquid and Thixotropic Epoxies, such as Epoxy Primer or Thixotropic Injection Resin, into small holes in order to fill fine cracks or hollow sections behind cracked plaster, render or tanking.

 

Injector, with one-way valve inside

 

Injection of wood

Using a Syringe to inject resin into timber to fill a crack.

Injectors, 10mm diameter hole

Buy 10 - £1.99 -

Buy 100 - £19.87 -

Buy 1000 - £198.66 -

Buy 100 gloves - £10.97 -

Buy pallet knife for mixing -

For measuring part pots for small mixes syringes are useful.

Syringes

Buy 10cc Syringe - £0.52 -

Buy 20cc Syringe - £0.60 -

Buy 50cc Syringe - £1.50 -

You can also use these Injectors to provide internal rot and insect attack protection in wood by injecting a Boron Paste inside the timber. See our Boron Shop for details.

Epoxy Remover Fluid

Buy 250cc can - £5.99 -

Buy Box of 100 Gloves -

Plugs, to cap 10mm diameter holes

£3.96 - pack of 25, dark brown -

£3.96 - pack of 25, brick red -

£3.96 - pack of 25, limestone/buff -




Epoxy Primer/Consolidator

A two part, thin clear Epoxy resin for priming and consolidating masonry and wood.

Sizes - 500cc and 1000cc (1 litre)

Uses - Epoxy Primer should always be used before applying Mouldable Epoxy Putty onto smooth timber, planed timber, hardwoods, stone, brick, concrete or render. (However, on dust free rough or well dugout softwood timber it is not strictly required).

Ensure that ALL rotted wood is cut out completely. Filling over rot is a waste of money.

Mixing - mix the two liquids thoroughly together in the ratio 2 Base to 1 Activator until a perfectly even colour. Pour into another clean container and re-mix. Apply with a brush, or by pouring.

Usage rate - 1 litre of Epoxy Primer will cover 1 square metre at a thickness of 1mm, or about 6 square metres at a normal paint film thickness.

Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed vinyl), Syringes.

Syringes

Sizes - 10cc, 20cc and 50cc. Outlet outside diameter 4mm.

Uses

Measuring - for dosing liquid Epoxies, such as Epoxy Primer, to maintain the correct mix ratios (keep one syringe with each part - Activator and Base).

Injecting - for injecting liquid and Thixotropic Epoxies, such as Epoxy Primer or Thixotropic Injection Resin, into small holes in order to fill fine cracks or hollow sections behind cracked plaster, render or tanking.

 

Applying Epoxy Primer by brush

Priming wood ready for Timberbuild

 

Injection of cracked plaster

Using a Syringe to eliminate hollow patches behind the plaster.

Click for more Information.

Epoxy Primer - clear

Buy 500cc - £18.20 -

Buy 1000cc - £27.88 -

Buy 100 gloves - £10.97 -

Buy pallet knife for mixing -

For measuring part pots for small mixes syringes are useful.

Syringes

Buy 10cc Syringe - £0.52 -

Buy 20cc Syringe - £0.60 -

Buy 50cc Syringe - £1.50 -

 

Finish the job off with our Boron Paste and Boron Rods - these provide internal rot and insect attack protection by dissolving inside the timber. See our Boron Shop for details.

 

Epoxy Remover Fluid

Buy 250cc can - £5.99 -

 

 

 

 




Rods and Bars - Epoxy/Glass, Zinc Plated Steel Allthread, Helical Stainless Steel

Uses - reinforcement of timber beams, brick, concrete and stone structures.

Epoxy-Glass Bars - cut from 1 metre or 3 metre lengths

Available in 6, 8, 10, 13, 16mm diameters

Zinc Plated High Tensile Steel Allthread - cut from 3 metre lengths

Available in 12, 16, 20, 25mm diameters

Helical Stainless Steel Bar

Available in 6mm and 8mm diameters, 1 metre or 7 metre lengths. Each 1 metre length will make one typical brickwork or blockwork 'stitch'.

 

Zinc Plated High Tensile Allthread Bars in a Timber Beam Upgrade

Resin Repair in a dugout Oak Beam

Stainless Steel Helical Bar

Stainless Steel Helical Bar

Helical Bar - stainless steel

Buy 6mm x 1 metre - £4.88 per metre -

 

Priced by Telephone to suit your project - supplied cut to length - call 01626 331351

 

 

 

 

 

 

 

 




Empty Cartridge Tubes - with pistons and nozzles

Sizes - 400cc and 1000cc (1 litre)

Uses - these Cartridge Kits are supplied empty ready to hand fill with our Structural Epoxy Pouring Resin (by pouring) or with our Thixotropic Injection Resin by using the 'pusher plate' supplied with the Kit.

Filling - the pusher plate drops into the pot containing the mixed resin and allows the open end of the tube to be pushed down into the pot, filling itself as it goes down.

Sizes

400cc - 250mm/10 inches long tube, with piston and pointed nozzle

1000cc - 250mm/10 inches long tube, with piston and pointed nozzles

Frequently purchased with this product - 400cc or 1000cc Skeleton Gun, Extension Injection Tubes - ring us to discuss your exact requirements.


Empty Cartridge Tubes - fitted with a Needle - with pistons and nozzles

Sizes - 400cc only

Uses - these Cartridge Kits are supplied empty ready to hand fill with our Thixotropic Injection Resin Slow Set by using the 'pusher plate' supplied with the Kit.

Filling - the pusher plate drops into the pot containing the mixed resin and allows the open end of the tube to be pushed down into the pot, filling itself as it goes down.

Sizes

400cc - 250mm/10 inches long tube, with piston and Needle - 2mm diameter x 30mm long.

400cc Cartridge Kit

Cartrdige Kit - 400cc - for Epoxy Resins

1000cc Cartridge Kit

Cartridge Kit - 1000cc - for Epoxy Resins


Needle Nosed 400cc Cartridge Kit

400cc Cartridge Tube with Needle inject a Brick

400cc Cartridge Tube with Needle inject a Brick

Empty Cartridge Tube Kits

Buy 400cc Cartridge Tube Kit - £1.95 -

Buy 1000cc Cartridge Tube Kit - £4.25 -

You can specify the length of extension tube that you require. They are available in the following diameters: outer tube diameter - 8mm, 10mm and 15mm. (Other sizes - specially made to order).

Plugs, to cap 10mm diameter holes

£3.96 - pack of 25, dark brown -

£3.96 - pack of 25, brick red -

£3.96 - pack of 25, limestone/buff -

 

 


 

Empty Cartridge Tube Needle Nose - Kit

Buy 400cc Kit - £5.95 -

 

Plugs, to cap 10mm diameter holes

£3.96 - pack of 25, dark brown -

£3.96 - pack of 25, brick red -

£3.96 - pack of 25, limestone/buff -




Extension Nozzles - for cartridge tubes

Sizes - 400cc and 1000cc x 400mm long

Uses - to extend the Cartridge Nozzle so that holes can be injected with resin correctly - from the hole base outwards. This minimizes the risk of air voids within the resin, a cause of bond weakness.

Sizes - to fit either the 400cc or 1000cc Cartridge Tubes, with differing length extensions to suit the hole depth.

Specials - we can fit varying lengths of tubing to the threaded adapters to suit your job. Please call us on 01626 331351.

 

 

 

 

400cc Cartridge Extension Tube, 10mm diameter

Extension Nozzle for 400cc Cartridge

 

1 Litre Cartridge Extension Tube, 10mm diameter

Extension nozzle for 1000cc cartridge

1 Litre Cartridge Extension Tube, 15mm diameter

1 litre Cartridge Extension Tube - 15mm outer diameter

8mm Diameter Extension Nozzles -

400mm long - for 400cc Tube - £4.65 -

10mm Diameter Extension Nozzles -

400mm long - for 400cc Tube - £4.85 -

400mm long - for 1 Litre Tube - £6.25 -

15mm Diameter Extension Nozzles -

400mm long - for 400cc Tube - £7.50 -

400mm long - for 1 Litre Tube - £7.50 -

The Diameter given is the outer dimension (OD).




Skeleton guns

400cc Skeleton Gun - for injection using UltraCure 400cc and all other products in single tubes, 280cc to 400cc

 

 

1000cc Skeleton Gun - Special 1 Litre gun for injection using UltraCure 1000cc or other 1 Litre products.

 

 

380cc 1:1 to 3:1 Skeleton Gun - gun for injecting Pure Epoxy Resin and similar side by side resin cartridges.

 

 

 

 

400cc Skeleton Gun - single piston

Skeleton Gun -  400cc - single tube

1000cc Skeleton Gun - single piston

Skeleton Gun - 1000cc - single tube

Twin piston, side by side,

380cc Skeleton Gun, 1:1,

Timberbuild Skeleton Gun

Skeleton Guns - 3 types

Buy - 310/400cc - £16.50 -

Buy - 1000cc - £26.98 -

Buy - 380cc/1:1 to 3:1 gun - £28.90 -

Buy Pallet Knife -

Buy Box of 100 Gloves -

 

 

 

 

 

 

 

 




Tools - 3D Cutters - deep hole and slot cutting

Sizes - 5mm to 32mm diameter x 110mm or 250mm long.

A high speed tool for use in electric drilling machines. The 3D Cutter drills holes, cuts slots and can be dragged sideways to clean out previously rough drilled or cut out slots or holes.

 

3D Cutter - standard length

250mm extended version also available

3D Cutter - drills holes and cuts sideways

3D Cutters - other sizes available

25mm diameter x 110mm length - £24.40 -

32mm diameter x 110mm length - £25.83 -

Extended length versions:

25mm diameter x 250mm length - £38.50 -

32mm diameter x 250mm length - £39.77 -




Tools - All Metal Chisels - deep slot clearance

All Metal Chisels, made of solid steel, can be used with lump hammers and as levers, to clean out slots and tidy up previously roughly cut out cavities in wood.

 

All Steel Chisel - standard length 14 inches - also available extended

All Steel Chisels

All Steel Chisels

Standard length;

30mm wide - £19.87 -

Extended length

30mm wide - £39.87 -




Liquid Membranes - waterproof brush on coating, indoors & outdoors.

Epoxy Seal Coating

Click here for help with sealing floors.

Sizes - 1 litre, 2.5 litre, 5 litre - colour choice - clear, grey, red.

Uses - waterproofs, seals and provides a tough vapour barrier membrane on concrete, render, stone, brick and quarry tiles. Apply by brush or roller. Pure epoxy - no solvents, no water.

Ultra Epoxy Seal coating is perfect for sealing damp concrete floors, damp screeds, damp slab and tiled floors, to prevent the passage of moisture and moisture vapour.

Can be used to prepare old or new concrete or screeded floors for direct laying of wooden floors. It acts as a complete vapour barrier.

Mixing - mix the two liquids thoroughly together in the ratio 2 Base to 1 Activator until a perfectly even colour using a paddle in an electric drilling machine. Pour into another clean container and re-mix. Apply with a brush, or by pouring.

Blinding - use our Grit in the top coat to provide a rough surface for adhesive, if you intend fitting a tiled or bonded flooring of any kind.

Coverage Rate - up to 2.5 square metres per litre on smooth surfaces.

Colours - Clear (not water white clear), Red = RAL3013, Grey = RAL7042.

 

Frequently purchased with this product

Disposable Vinyl Gloves, Mixing Paddle

 

 

 

 

 

Apply by brush or roller

Spreading Grey Epoxy Seal Coat with a rubber blade.

Epoxy Seal Coat is a two pack product.

Add Grit to the top coat if you need to provide a 'key' for adhesive.

Brake Roller and Blinding Grit

Ultra Epoxy Seal Coat

Ultra Epoxy Seal coating - Clear - £27.88 per 1 litre, £48.92 per 2.5 litres, £83.85 per 5 litres.

Ultra Epoxy Seal coating - Red or Grey - £29.89 per 1 litre, £52.88 per 2.5 litres, £91.99 per 5 litres.

Buy Epoxy Seal Coating Clear - 5 litre -

Buy Epoxy Seal Coating Clear - 2.5 litre -

Buy Epoxy Seal Coating Clear - 1 litre -

Buy Epoxy Seal Coating Red - 5 litre -

Buy Epoxy Seal Coating Red - 2.5 litre -

Buy Epoxy Seal Coating Grey - 5 litre -

Buy Epoxy Seal Coating Grey - 2.5 litre -

Buy Epoxy Seal Coating Grey - 1 litre -

Grit for making Epoxy Seal Coat ready for tiling adhesive

16 Grit - 1mm to 2mm grit size - £3.07 per kilo -

12 Grit - 2mm to 3mm grit size - £3.07 per kilo -

Mixed Grit - 1mm to 3mm grit sizes - £3.47 per kilo -

 

Buy Mixing Paddle -

Buy Box of 100 Gloves -

Epoxy Remover Fluid

Buy 250cc can - £5.99 -




UV Resist Clear Coating Polyurethane Based - use indoors and outdoors - one pack, no mixing required.

Size - 1 litre

Uses - Ultra UV Resist coating is perfect for sealing damp concrete floors, damp screeds, damp slab and tiled floors, to prevent the passage of moisture and moisture vapour.

Can be used to prepare old or new concrete or screeded floors for direct laying of wooden floors. It acts as a complete vapour barrier.

Coverage Rate - up to 5 square metres per litre on a smooth surface.

Frequently purchased with this product: Disposable Vinyl Gloves

 

 

UV Resist Clear Coat is a one pack Polyurethane.

UV Light Resistant Clear Coating

Ultra UV Resist Clear coating - Clear

£18.65 per 1 litre

Buy coating - 1 litre -

Buy Box of 100 Gloves -

 

 

 

 

 

 

 

 




Crack Repair Kit - includes helical bar, grout and applicator gun

Size - 3 litre Grout, 10 metres of bar

For repairing cracks in masonry and concrete.

The Kit contains: 10 x 1 metre lengths of Helical Bar, 3 litres of W60 Flexi Grout, Injection Applicator Gun (yellow), Pointing Tool and Mixing Paddle.

Usage rate - will form up to 10 x 1000mm horizontal stitches in brickwork, for example.

 

Complete Crack Repair Kit

Crack Repair Kit for walls

Crack Repair Stitching Kit

Buy Crack Repair Kit - £96.50 -

 

Buy Injection Grout Gun - £29.60 -

Buy Mixing Paddle - £8.96 -

Buy Box of 100 Gloves - £10.97 -

 




Timber Repair Kit - Timber-Resin Splices made to order - any size

For repairing timber beams, lintels, rafters, tie beams, carrier beams, joists and bressumers. These bespoke beam kits contain a new, laminated structural timber, made in kiln dried wood to C24 Grade or higher, fitted with connector bars made from zinc plated 8.8 Grade High Tensile Allthread bar. Pouring or injection resins are also included.

Engineering - free Design, Method Statement and Tools List (Hire available).

Frequently purchased with this product - additional Structural Pouring Resin

 

TRS Kit - Zinc Plated 8.8 Dowels in softwood

Timber-Resin splice Kit for Structural Timber Repair

 

Pouring Epoxy Resin into a Timber-Resin Splice top slot in a joist repair

£ POA - price on application, Free Quotation - call Angela or David on 01626 331351

 

Have a look at full details of the Timber-Resin Splice System at:

www.timber.org.uk and www.timber-repair.co.uk

 




Epoxy Adhesive Paste

Supplied as two pastes to mix together 1:1.

Sizes - 1 litre, 2.5 litre, 5 litre & 10 litres

Mixing - mix using a pallet knife, by hand, or in bulk using a paddle in an electric drilling machine.

Uses - for laminating and bonding flooring materials to concrete or to each other. Also used for wooden flooring, oak flooring, tile bonding, slate laying. Completely waterproof and structural. Can be used as a combined adhesive and waterproof Membrane. Flexible enough to accommodate oak and other wooden flooring materials, even over under floor heating.

Usage rate - by volume - allow about 1 litre per square metre on smooth surfaces - for example a 6.25 litre pack will give about 6 square metres at 1mm thickness, but for rough surfaces you may need 2mm or even 3mm of thickness. Use a smooth plastic spreader. Can be used as a continuous coating or in 'dabs'.

Frequently purchased with this product Pallet Knife, Vinyl Gloves (Box of 100), Mixing Paddle.

Epoxy Adhesive Paste

Epoxy Adhesive Paste 5 litres

Epoxy Adhesive Paste/Flooring Adhesive

£96.88 10 litre, £74.73 5 litre,

£35.82 3.33 litres, £29.88 2.5 litre,

£12.87 1 litre.

Buy 10 litres of adhesive -

Buy 5 litres of adhesive -

Buy 3.33 litres of adhesive -

Buy 2.5 litres of adhesive -

Buy 1 litres of adhesive -

Buy Pallet Knife -

Buy Box of 100 Gloves -

 

Epoxy Remover Fluid

Buy 250cc can - £5.99 -




Epoxy Patching Mortar for patching floors and walls - waterproof

Structural, waterproof and flexible. This is a three part (two epoxy liquids, one powder) mortar.

Size - 2.5 litre

Mixing - mix using a pallet knife, by hand.

Uses - for filling holes in flooring materials - e.g. concrete. Also used for joint repairs in slate, block, slabs and brick. Completely waterproof and structural.

Usage rate - by volume - a 2.5 litre pack would fill a hole 25mm deep across an area of about 300mm x 330mm. (Approximately 1 inch x 12 inches x 12 inches)

Epoxy Patching Kit for cracks and holes in masonry

Epoxy Patch Repair Mortar

Epoxy Patching Mortar

Buy Patching Mortar - 2.5 litres - £29.98 -

Epoxy Remover Fluid

Buy 250cc can - £5.99 -

 

 

 

 

 

 




Tanking Slurry Powder

BBA Certificated.

Click here for help with sealing floors.

Size - 25kgs plastic tub

Uses - for coating masonry, brick, stone, floors and walls.

Mixing - mix with water to form a 'slurry' - a smooth, brushable thick paint, like masonry paint.

Application - wet the surfaces first and allow to dry until just damp. Brush on one coat, with horizontal brush strokes and allow to dry. Re-damp before re-coating, if dried right out. Apply a second coat, brushing vertically. This eliminates the risk of missed patches and pinholes. Slurry can be rendered over whilst wet, or prime with another coat, or use BondaAcryl as a primer.

Usage rate - 6 - 8 square metres per 25kgs, per coat, subject to surface roughness.

Also Required when Tanking - Joint Filling Mix - Fillet Seal, (for the floor to wall gap joint), Leakstop - Hydraplug, (for instant leak and weep sealing).

Usage rates - Joint Filling mix - mix with water to produce a stiff mortar, allow 1kg per 1 metre of joint approximately 25mm x 25mm (1 inch x 1 inch) at the floor to wall joint, or in cracks and voids.

Frequently purchased with this product - Fillet Seal, Hydraplug, Bondacryl.

 

 

Tanking Powder mixed with water - HydraDry

Apply Tanking as two slurry coats, by soft brush.

Slurry Tanking onto Concrete Block

Use Joint Filling Mix to seal the floor to wall joint

Joint Fillet Seal for sealing floor to wall joints.

Seal weeps or leaks with HydraPlug

Hydra Plug for sealing weeps

Tanking Slurry Powder

BBA Tanking Slurry - £59.86 per 25kgs

Joint Filling Mix - £53.60 per 25kgs

Hydraplug Leakstop - £23.98 per 5kgs

Buy Tanking Slurry Powder,

Hydradry - 25kgs -

Buy Joint Filling Mix,

Fillet Seal - 25kgs -

Buy Leakstop,

Hydraplug - 5kgs -

 

 

 

 

 

 

 

 

 




Joint Sealing

Fillet Seal - waterproof cement based mortar

Always cut out cracks or floor to wall joints to a square shouldered slot. Do not simply lay a fillet of Jointfill over the existing crack or gap - this will fail.

Size - 25kgs plastic keg

Uses - for waterproof filling of cracks in masonry, brick, stone, floors and walls.

Mixing - mix with water to form a smooth, stiff mortar. Wet all the repair surfaces first and allow to dry until just damp. Apply a coat of BondAcryl by brush and immediately lay in the Jointfill with a trowel. Smooth to flush.

Usage rate - approximately 1 metre of 25mm x 25mm (1 inch x 1 inch) slot per 1kg of Jointfill powder. So, one 25kg keg will make about 15 litres of joint filling mortar, when mixed with minimal water.

Also Required when Tanking - Leakstop - Hydraplug, (for instant leak and weep sealing).

Frequently purchased with this product - Tanking Powder, Hydraplug and Bondacryl.

Fill slots and floor to wall joints with Jointfill - Fillet Seal

Cut out all cracks and joints to at least 25mm x 25mm slots

Cut our cracks to a square shouldered slot

Make good with Fillet Seal before

Tanking over with Tanking Slurry

 

Fillet Seal

Joint Filling Mix, Fillet Seal - £53.60 per 25kgs,

Leakstop, Hydraplug - 23.98 per 5kgs, plus VAT

Buy Joint Filling Mix, Fillet Seal - 25kgs -

Buy Leakstop, Hydraplug - 5kgs -

 

NOTE - Floor to wall joints

These are always one of the weakest parts of construction and are frequently left unfinished.

This gap then bleeds water vapour, which can be sucked up the back of the skirting boards (which may rot) and into the wall plaster. Use our Jointfill or W60 Flexi Grout to fill the gap properly.

 




Crack Filling Powder

Flexi Grout - flexible cement based mortar

Always cut out cracks or floor to wall joints to a square shouldered slot. Do not simply lay a fillet of Flexi Grout over the existing crack or gap - this will fail.

Uses - for repointing wall joints and filling cracks in masonry, brick, stone, floors and walls.

Mixing - mix with water to form a smooth, stiff mortar. Wet all the repair surfaces first and allow to dry until just damp. Apply a coat of BondAcryl by brush and immediately lay in the Flexi Grout with a trowel. Smooth to flush.

Usage rate - approximately 1 metre of 25mm x 25mm (1 inch x 1 inch) slot per 1kg of Flexi Grout powder. So, one 3 litre bucket will make about 15 litres of joint filling mortar, when mixed with minimal water.

Frequently purchased with this product - Tanking Powder, Hydraplug and Bondacryl.

Crack filling  - powder to mix, apply with a grouting tool or trowel

Crack Repair 3 litre

Buy Crack Repair Gut. (Does not include tools - see complete kit above)

Buy 3 litre tub of Grout - £42.12 -

 

Buy Injection Grout Gun - £29.60 -

Buy Mixing Paddle - £8.96 -

Buy Box of 100 Gloves - £10.97 -

 

 

 

 




Bonding Liquid

Sizes - 2.5 litres, 5 litres, 25 litres

Uses - priming, tanking, in sand and cement mixtures.

Priming - mix with cement powder only to create a waterproof primer for new concrete, render or mortar patches.

Tanking Applications - for priming areas ready to receive Jointfill Fillet Seal (to ensure good bonding and eliminate poor or excessive suction), or to prime over Tanked surfaces ready for Render coats of sand and cement.

General Purpose - Bonds repair mortar (sand and cement) to old concrete or render, when used as a primer. Makes a sand and cement mix waterproof, when used instead of water. Allows 'screeds' to be laid much thinner than normal - down from 50mm to 12.5mm.

Usage rate - see our guide in the Data Sheet - click here.

 

 

BondAcryl is a Primer for concrete, stone, brick, render and Tanking

Bondacryl for priming masonry

BondAcryl, 5 litre and 2.5 litre

For priming jobs always ensure that the Bondacryl is still wet when applying the next product. Otherwise reapply a fresh coat.

BondAcryl

Buy Bondacryl - 2.5 litre - £18.96 -

Buy Bondacryl - 5 litre - £28.94 -

Buy Bondacryl - 25 litre - £98.88 -

 

Buy Box of 100 Gloves - £10.97 -

 

 

 

 

 

 




Accessories

Hole Cleaning Brush

Size - 275mm long, minimum hole diameter 5mm.

Uses - for cleaning out holes and slots prior to resin injection, in order to removed loose material and dust. Use the Hole Cleaning Pump to finish dust removal.

Hole Cleaning Pump

Uses - for blowing out holes and slots prior to resin injection, in order to removed loose material and dust. Use the Hole Cleaning Brush first.

Syringes

Sizes - 10cc, 20cc and 50cc. Outlet outside diameter 4mm.

Uses

Measuring - for dosing liquid Epoxies, such as Epoxy Primer, to maintain the correct mix ratios (keep one syringe with each part - Activator and Base).

Injecting - for injecting liquid and Thixotropic Epoxies, such as Epoxy Primer or Thixotropic Injection Resin, into small holes in order to fill fine cracks or hollow sections behind cracked plaster, render or tanking.

Smoothing Roller

Uses - for smoothing Mouldable Epoxy Putty.

Epoxy Remover Fluid

Uses - for removing uncured Epoxy Resins from surfaces and tools


Colouring Additives

Uses - add small quantities (5% or less of the total mix by volume) to Mouldable Epoxy Putty, Thixotropic Injection Resins.

Thixotropic Resin in natural sand colour

Natural yellow sand colour

Also available in Red and Black.


 

Plastic Plugs

Tapered, hollow, push in, 10 -12mm.

Uses - for capping holes drilled in wood or masonry.

Colours - Dark Brown, Brick Red, Limestone.

Frequently purchased with our 10mm Masonry Bits and 10mm Wood Auger Bits.

A slim brush for hole cleaning

Hole cleaning brush - for cleaning out holes for resin

A 'puffer' pump for hole cleaning

Hole cleaning pump - for blowing out holes for resin

Syringes for measuring or injecting Epoxies

Syringes - for measuring resin liquids or for injecting resins

Smoothing Roller for Putty

Smoothing roller for Mouldable Epoxy Putty

Epoxy Remover Fluid  - a solvent cleaner for tools and surfaces for uncured resin


Additive in Grey - slot filled

Additive in Grey - slot filled

Additive in Red - mixed into resin

Additive in Red - mixed into resin


Plastic Plugs for hole filling

Plastic Plugs for filling 10mm diameter holes

Three colours available.

Accessories

Hole Cleaning Brush

Buy Brush - £2.99 -

 

Hole Cleaning Pump

Buy Pump - £4.99 -

Syringes

Buy 10cc Syringe - £0.52 -

Buy 20cc Syringe - £0.60 -

Buy 50cc Syringe - £1.50 -

 

Syringes with Needles

10cc Syringe+ Needle - £1.52 -

20cc Syringe+Needle - £1.60 -

50cc Syringe+Needle - £2.50 -

Buy Spare Needles - £1.00 -

Smoothing Roller

Buy Roller - £2.50 -

Epoxy Remover Fluid

Buy 250cc can - £5.99 -


 

Colouring Additives

£4.78 for Liquids, £2.50 for Powders

Buy liquid Grey - for 400cc -

Buy liquid Red - for 400cc -

Colouring Powder 50g - black -

Colouring Powder 50g - brown -

Colouring Powder 50g - red -

Colouring Powder 50g - white -


Plugs, to cap 10mm diameter holes

£3.96 - pack of 25, dark brown -

£3.96 - pack of 25, brick red -

£3.96 - pack of 25, limestone/buff -

 

 

 

 

 




Kits

Main Component

Kit Prices




 

1. Concrete - Patching

Epoxy Patching Mortar Kit

Includes: 2.5 litres of Epoxy Mortar, Box of 100 Uni Handed Vinyl Gloves, 1 litre of Epoxy Primer, Trowel.

Concrete Patch repair Kit

Buy Patching, Kit No. 1 - £78.81 -

Buy Additional Mortar - £29.98 -

Buy 250cc Epoxy Cleaner - £5.99 -




 

2. Concrete - Hole Injection

Thixotropic Epoxy Resin

Includes: 400cc Thixotropic Resin, 400cc Cartridge Kit, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves, Extension Tube 10mm x 400mm.

Thixotropic Hole Injection Kit

Buy Injection, Kit No. 2 - £54.61 -

Buy Additional Resin - £26.86 -

Buy SLOW SET Injection Kit - £54.61 -

Buy Additional SLOW SET - £26.86 -




 

3. Concrete - Fixing Bolts and Studs

Thixo Rapid

Includes: 400cc Thixo Rapid Resin, 280cc, Box of 100 Uni Handed Vinyl Gloves, Spare Mixing Nozzle.

Anchoring with Thixo Rapid Resin

Buy Stud Fixings, Kit No. 3 - £27.38 -

Buy Additional Resin - £15.76 -

Note - we can supply the Studs, Nuts and Washers.




 

4. Concrete - Crack Filling

Epoxy Primer/Consolidator

Mouldable Epoxy Putty

Includes: 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

Mixing Mouldable Epoxy Putty

Buy Crack Filling, Kit No. 4 - £50.05 -

Buy Additional 1 L Putty - £18.38 -

Buy 500cc Additional Primer - £18.20 -

Buy 250cc Epoxy Cleaner - £5.99 -




 

5. Concrete - Hollowness Injection

Click for more Information.

Epoxy Primer/Consolidator

Includes: 0.5 litres of Epoxy Primer, Syringes - set of 3, Box of 100 Uni Handed Vinyl Gloves.

Injecting hollow plaster and render

Buy Injection, Kit 5 - £31.79 -

Buy Additional Primer - £18.20 -

Buy 1000cc Additional Primer - £27.88 -

Buy 250cc Epoxy Cleaner - £5.99 -

 




 

6. Concrete - Rusty Reinforcement

Owatrol Oil

Owatrol Oil neutralises rust

Buy 0.5 litres of Oil - £16.40 -

Buy 5 litres of Oil - £115.84 -

Buy Box of 100 Gloves - £10.97 -

 




 

7. Render - Crack Filling

Epoxy Primer/Consolidator

Mouldable Epoxy Putty

Includes: 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

Mixing Mouldable Epoxy Putty

Buy Crack Filling, Kit No.7 - £41.35 -

Buy Additional 1 L Putty - £18.38 -

Buy 500cc Additional Primer - £18.20 -

Buy 250cc Epoxy Cleaner - £5.99 -




 

8. Render - Hollowness Injection

Click for more Information.

Epoxy Primer/Consolidator

Includes: 0.5 litres of Epoxy Primer, Syringes - set of 3, Box of 100 Uni Handed Vinyl Gloves.

Injecting hollow plaster and render

Buy Injection, Kit No. 8 - £31.79 -

Buy 500cc Additional Primer - £18.20 -

Buy 1000cc Additional Primer - £27.88 -

Buy 250cc Epoxy Cleaner - £5.99 -




 

9. Brick - Crack Stitching

Crack Stitching Kit

Includes: 10 x 1 metre lengths of Helical Bar, 3 litres of W60 Flexi Grout, Injection Applicator Gun (yellow), Pointing Tool and Mixing Paddle.

Crack Repair Kit for walls

Buy Crack Stitching, Kit No. 9.

Includes Tools as shown - £96.50 -

Buy Box of 100 Gloves - £10.97 -

 




 

10. Brick - Crack Filling

W60 Flexi Grout Only

Includes: 3 litres of W60 Flexi Grout only.

Crack filling  - powder to mix, apply with a grouting tool or trowel

Buy Grout, Kit No. 10 - £42.12 -

Buy Box of 100 Gloves - £10.97 -




 

11. Wood - Splits & Holes, filling

Epoxy Primer/Consolidator

Mouldable Epoxy Putty

Includes: 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

Mixing Mouldable Epoxy Putty

Buy Wood Split Filling, Kit No. 11 - £41.35 -

Buy Additional 1L Putty - £18.38 -

Buy 500cc Additional Primer - £18.20 -

Buy 250cc Epoxy Cleaner - £5.99 -




 

12. Wood - Split Stitching

Thixotropic Epoxy Resin

Epoxy/Glass Bars

Includes: 10 x 6mm x 1 metre Epoxy Glass Bar, 400cc Thixotropic Resin, 400cc Cartridge Kit, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves, Extension Tube 10mm x 400mm.

 

Wood split stitching kit

Buy Stitching, Kit No. 12 - £87.58 -

Buy Additional Resin - £26.86 -

Buy SLOW SET Stitching Kit - £87.58 -

Buy Additional SLOW SET Resin - £26.86 -

Buy 250cc Epoxy Cleaner - £5.99 -

 




 

13. Tiles - Inject Grout Gaps for hollowness or directly into Cracks

Click for more Information.

Epoxy Primer/Consolidator

Includes: 0.5 litres of Epoxy Primer, 5 x 20ml Syringes, 5 x Syringe Needles, 1 x 250ml Mixing Jug, 1 x 250cc Epoxy Cleaner Remover Fluid, 1 x Box of 100 Uni Handed Vinyl Gloves.

Buy Injection, Kit 13 - £44.66 -

Buy Additional Primer - £18.20 -

Buy 1000cc Additional Primer - £27.88 -

Buy 250cc Epoxy Cleaner - £5.99 -




 

14. Eco Paint Stripper

Click for more Information.

Paint Stripping Kit

Includes: 5 litres of Eco Water Based Paint Stripper, 1 x Box of 100 Uni Handed Vinyl Gloves, 1 x Roll of Clingfilm.

Brush apply a coat of Ec o Paint Stripper and then cover with clingfilm.

Brushing on Eco Paint Stripper - no smell

Buy Paint Stripping, Kit 14 - £84.00 -

 

 




 

15. Black Epoxy Putty

Use with Epoxy Primer/Consolidator

Mix Black Powder, plus Mouldable Epoxy Putty - to give shades of grey to black.

Includes: Packet of Black Colour Powder, 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

 

Mixing Mouldable Epoxy Putty

Add Black Colour Powder to make the shade

of grey/black required. Smooth with Epoxy Cleaner Fluid.

Black Epoxy Putty, Kit No. 15 - £44.35 -

Buy Additional 1L Putty - £18.38 -

Buy 500cc Additional Primer - £18.20 -

Buy 250cc Epoxy Cleaner - £5.99 -

 

 

 




 

16. Stone Repair

Epoxy Primer/Consolidator plus

Mouldable Epoxy Putty

Includes: 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

Mixing Mouldable Epoxy Putty

Buy Stone Repair, Kit No.16 - £41.35 -

Buy Additional 1 L Putty - £18.38 -

Buy 500cc Additional Primer - £18.20 -

Buy 250cc Epoxy Cleaner - £5.99 -




 

17. Concrete - Self Leveling Floor Filler - structural, with a smooth surface finish in grey.

Self Leveling Epoxy Kit

Includes: 2.5 litres of Structural Epoxy Pouring Resin, Box of 100 Uni Handed Vinyl Gloves, Mixing Paddle

 

 

 

Mixing Self Levelling Pouring Resin

Mixing Structural Epoxy self leveling resin

Buy Self Leveler, Kit No. 17 - £82.76 -

Buy 250cc Epoxy Cleaner - £5.99 -

 

 

 

 

 




 

18. Gravestone Repair Kit

Slow Set Thixotropic Epoxy Resin

with Epoxy/Glass Bars as dowels

Includes: 2 x 6mm x 1 metre Epoxy Glass Bar, 400cc Slow Set Thixotropic Resin, 400cc Cartridge Kit, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves, Extension Tube 8mm x 400mm

 

 

 

 

Thixotropic Resin to bond Epoxy Glass dowels into broken gravestones

Thixotropic Epoxy Resin, Slow Set Version, used to bond Epoxy Glass dowels into the edges of broken gravestone headstones.

Gravestone Repair, Kit18 - £57.59 -

Additional Resin - £26.86 -

Buy 250cc Epoxy Cleaner - £5.99 -




 

19. Plaster Ceiling and Cornice Repair Kit

Slow Set Thixotropic Epoxy Resin

with Epoxy/Glass Bars as dowels

Includes: 2 x 6mm x 1 metre Epoxy Glass Bar, 400cc Slow Set Thixotropic Resin, 400cc Cartridge Kit, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves, Extension Tube 8mm x 400mm

 

 

 

 

 

Thixotropic Resin to bond Epoxy Glass dowels into broken gravestones

Thixotropic Epoxy Resin, Slow Set Version, used to bond Epoxy Glass dowels through the hollow, loose or detaching ceiling, cornice or decorative plaster parts to re-secure them to the lath above.

Ceiling Repair, Kit19 - £57.59 -

Additional Resin, 400cc - £26.86 -

Epoxy Cleaner, 250cc - £5.99 -





Shopping on our Site is Safe!

When you provide us with any personal information including your name, address, e-mail and credit card number, it is processed over a secure connection on secure servers. We use Secure Socket Layers (SSL) to encrypt all information you provide before sending it to our servers. SSL is the industry standard and the best software available for secure ecommerce transactions.


Home | Repair Cracks | Brick Adhesives | Chemical Anchors | Coatings | Repair Concrete |

Repair Render | Returns Policy | Contact


List of Help Pages

Wooden Beam End Repairs

Bearing Bases and Pads for Machines

Brake Roller Re-gritting Resin and Grit

Brick Bonding

Crack Repairs

Floor Coating

Injection of Cracks

Pond and Pool Repairs


Property Repair Systems

T: 01626 331351

F: 01626 331143

E: Mail us help@propertyrepairsystems.co.uk


Site written by: David Moore

David Moore, B.A. (Hons.), C.T.I.S., C.R.D.S. Technical Author

Google+


Use any of our Shopping Pages to place goods in your Shopping Basket - they all use the same Shopping Cart system.

Click to view your Shopping Basket

or continue shopping by clicking on one of our Shops below.

OUR SHOPPING PAGES


 

Other Property Repair Systems free advice Sites:

www.boron.org.uk - how to use Boron based insecticides/fungicides to treat timber rots and insect attack

www.dampness-info.co.uk - how to treat penetrating dampness in walls and plaster

www.deck-treatment.co.uk - how to treat patio decks and yacht decks

www.dryrot.biz - how to kill Dry Rot in buildings

www.drywallandfloor.co.uk - membranes for lining damp walls, floors, basements and cellars

www.fire-door-paint.co.uk - upgrade doors to 30 minutes fire resistance

www.joist-repair.co.uk - how to quickly repair joists and beams of any size

www.propertyrepairsystems.co.uk - fire retardant paints, hygiene products, metal bracket manufacture, crack injection

www.steel-fire-paint.co.uk - treat steel with Intumescent Paint to provide fire protection

www.timber.org.uk - systems of repair, with step by step methods

www.timber-repair.co.uk - how to repair timbers in buildings without wrecking the place

www.woodworm-info.co.uk - how to kill and prevent woodworm and death watch beetle

www.woodworm-expert-advice-forum.org.uk - answers to your Woodworm questions