Resins Shopping Page

Property Repair Systems is OPEN FOR BUSINESS - 01626 872886 - speak to real resins people

ALL PRICES ARE SHOWN EXCLUDING VAT

Click here for our Home Page

Click here to look at our Epoxy Resins choice by Job Type

 

   
       

Click to view your Shopping Basket

Pouring Resins for cracks, holes and slots

Pouring - Structural Epoxy Resin - Structural Pouring Grout

Injection Resins for cracks, holes and slots

Injection Resin - Structural Thixotropic Resin - Injectors, use for narrow cracks

Rapid Set Injection and Bonding Resin

Expanding Injection Resin - Polyurethane Liquid - Repair Kit for Hollow or Cracked Tiles

Filler Putty and Primer/Hardener Resins

Putty for Filling Cracks - Structural Epoxy Putty

Epoxy Primer/Consolidating Liquid, Wood Hardening, Clear

Ultra Thin Epoxy Consolidator/Hardener/Sealer, Clear

Laminating Resin, Adhesive Paste and Hole Filling Epoxy Mortar

Structural Thixotropic Laminating Resin - Standard and Slow Setting

Flooring & Tiling, Epoxy Adhesive Paste - Hole Filling - Epoxy Patch Mortar Kit

Window frame and Timber Frame Repairs

Frame and Cill Repair Starter Pack

Coatings for Drives, Floors and Garages

Driveway Resin for Bonding Decorative Surface Grit

Epoxy Clear and Coloured Epoxy Coatings for floors - Grits for tiling or self leveling over on floors

Garage Epoxy Floor Paint - Ultra Heavy Duty - Garage Cement Based Tanking

Accessories, Tools, Grit, Epoxy Cleaner

Cartridge Tubes - Needle Nose Cartridge - Syringes - Extension Nozzle Tubes - Skeleton Guns - Smoothing Rollers

Colouring Additives - Plastic Plugs - Resin Remover/Cleaning Fluid - Resin Smoothing Fluid Spray

Grits for making Anti Slip Surfaces, or re-gritting Brake Rollers and Potato Peelers

Hole Cleaning Brush - Slot Cutting Chisel - Blowout Pump for Holes

Timber and Timber Frame Repair

Timber Repair Methods - Rebuild Resin for Surface Fine Filling

Putty for Filling Cracks - Structural Epoxy Putty - Epoxy Primer/Consolidating Liquid, Clear

Joining using Rods, Bars, Resins - Window Frame Repairs

Timber Clear Epoxy Coatings

Epoxy Primer/Consolidating Liquid, Clear - Epoxy Clear Coating for wood

Cement - Polymer Based System

Tanking Powder - Joint Sealing Powder - Crack Filling Powder - Bonding Liquid

Crack Repair Stitching Kit for Walls - Flexi Grout for Cracks


COMPLETE REPAIR KITS

Window Frame Repair Starter Pack

Tiles - Cracked or Hollow - Injection Kit

Concrete Patching - Concrete Hole Injection, Epoxy - Concrete Hole Injection, Expanding Polyurethane

Inject Hollow Render, Plaster, Concrete - Inject Hairline Cracks in Concrete

Fixing Studs - Rust Treatment

Concrete Crack Filling - Render Crack Filling - Brick Crack Stitching - Brick Crack Filling

Black Epoxy Putty

Stone Repair - Self Leveling Hole Repair - Gravestone Repair

Plaster Ceiling and Cornice Repair Kit

Wood Hole Filling - Wood Split Stitching

Stain Seal Resin - for plaster stains

Gritting Kits

Road Plate Gritting Kit - Brake Roller Kit - Potato Peeler Kits

List of Links to Help Pages

Note - prices exclude delivery and VAT

call for Trade and bulk prices.


Structural Epoxy Pouring Resin

Structural pour-on self leveling epoxy resins, for timber and masonry repairs, crack and hole filling. Self priming.

Machinery bases and bearing pads, bed grout.

Pouring Structural Epoxy Grout

Optional Grout version (thicker) - this has the same structural properties as the Pouring Resin, but is thicker.

Call us to discuss your job and we may then advise the thicker option.

Click here for Data Sheet.

Sizes - 2.5 litre and 5 litre plastic buckets.

Two versions - Resin or Grout (thicker) which are supplied as three part, thick porridge like pouring resins (two liquids and a powder).

Both self level and penetrate deeply.

Uses - for filling holes and, in combination with reinforcement rods, for structural repair of timber and masonry, including concrete.

Self leveling, self degassing (bubbles of air, trapped during mixing, will rise to the surface and escape)

Mixing - mix using a paddle in an electric drill.

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A hole 300mm x 300mm x 300mm (1ft x 1ft x 1ft) will require 27 litres.

Frequently purchased with this product - Mixing Paddle, 1 litre Cartridge Tube Kit, 1 litre Professional Skeleton Gun, Epoxy Remover Fluid.

Web Page - click here

To go to the top of this Page - click here


Structural Epoxy Pouring Resin and Grout Prices

Or buy by phone 01626 872886

Resin option - mid-grey colour

2.5 litres of Pouring Resin - £75.11 -

5 litres of Pouring Resin - £112.67 -

Grout option - blacker and slightly thicker

2.5 litres of Pouring Grout - £75.11 -

5 litres of Pouring Grout - £112.67 -

 

To go to the top of this Page - click here


Accessory prices

Mixing Paddle - £4.65 -

1 litre Cartridge Kit - £4.85 -

1 litre Cartridge Gun to fit above - £26.98 -

Shuttering Plastic 670mm x 550mm - £12.50 -

Shuttering Release Wax - £12.60 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

To go to the top of this Page - click here

Epoxy Cleaner/Remover Fluid

For cleaning tools and removing splashes of uncured resin

250cc can - £7.67 -

For the thicker Grout option call us on 01626 872886 to discuss your application - we'll help you choose the correct product.


Thixotropic Injection and Laminating Resin - structural adhesive

A two part, (two gels) thick injection resin. This resin does not drip or run - it is similar in consistency to Vaseline or Swarfega.

Mixes to a light wood/buff colour, but liquid colour pigment can be added - black, grey, beige, red. Self priming.

Thixotropic Epoxy Injection and Laminating Resin

Click here for Data Sheet

Sizes - 400cc and 1000cc (1 litre)

Uses:

1. For injecting into cracks, slots and holes, when used with a Cartridge Tube Kit.

2. For laminating and bonding materials together, by spreading.

3. For MOT Brake Roller re-coating, in combination with our Grits.

4. In combination with reinforcement rods, for structural repair of timber and masonry, including concrete.

5. As an anchor resin, to bond rods, studs, bolts and reinforcement into masonry and concrete.

Mixing - mix using a pallet knife, by hand.

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A 400cc pack will fill a hole 25mm in diameter to a depth of 800mm.

Extension tubes are available, made to order, to reach the base of any hole depth and in varying diameters.

Frequently purchased with this product - Mixing Knife, 400cc Cartridge Tube Kit, 400cc Skeleton Gun, 1 litre Cartridge Tube Kit,

1 litre Skeleton Gun, Vinyl Gloves (Box of 100).

Web Page - click here

To go to the top of this Page - click here


Thixotropic Injection/Laminating Resin Prices

Note - both require a Cartridge (at extra cost) if being used for injection, rather than spreading.

Or buy by phone 01626 872886

Standard Setting

400cc - £29.87 -

1 litre - £49.89 -

Slow Setting

400cc - £31.94 -

1 litre - £52.87 -

To go to the top of this Page - click here


Accessory Prices

Professional Skeleton Gun 400cc - £16.50 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

Epoxy Cleaner/Remover Fluid

For cleaning tools and removing splashes of uncured resin

250cc can - £7.67 -

Click here to go to Cartridge Tubes Section, if you need to inject the product.

To go to the top of this Page - click here


Thixotropic Rapid Injection Resin - structural adhesive

Thixo Rapid is a nozzle mixing two part product for rapid setting injection - 3 to 8 minutes, in a single plastic cartridge.

Fits a standard skeleton gun, ideal for bonding and injection.

Thixo Rapid Injection Resin - mixes in the nozzleMixing nozzlesfor Thixo Rapid Resin 280cc cartridge

Click here for Data Sheet

Sizes - 310cc single cartridge (yields 280cc)

Uses - can be used for anchors, bolts, studs and stitching in masonry, render and concrete crack repair. Ideal for fast brick bonding, or re-fixing bricks before repointing

Mixing - simply insert into a standard skeleton gun and screw on the mixing tube. Inject gently, like putting paste on your toothbrush, from the bottom of the hole outwards.

Usage rate - 280cc will fill a 10mm x 100mm slot for a length of 280mm (a typical 'stitch' repair would be 1000mm long).

Frequently purchased with this product - 400cc Professional Skeleton Gun, Spare Mixing Nozzles, Vinyl Gloves.

Web Page - click here

To go to the top of this Page - click here


Thixo Rapid Resin Prices

Or buy by phone 01626 872886

Purchase 1 to 11 single tubes of Thixo Rapid

280cc - £15.76 per tube -

When purchased in boxes of 10

280cc - £12.61 per tube -

To go to the top of this Page - click here


Accessory Prices

Pro Skeleton Gun - £16.50 -

Spare Mixing Nozzles - £0.65-

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

To go to the top of this Page - click here


Polyurethane Rapid Expanding Injection Resin

A brown liquid, runny honey consistency, which expands and fills holes and cracks. Moisture curing.

Polyurethan rapid expansion moisture curing injection resin for cracks in masonry, concrete and wood.

Click here for Data Sheet

Sizes - 1000cc (1 litre)

Uses - can be used for injection of concrete cracks and hollow sections

Mixing - none required. Pour straight into a 10cc, 20cc or 50cc Syringe (with no needle attached) and directly inject into a 5mm hole.

Usage rate - 1 litre will fill a hole up to 10 litres in volume, due to the product's expansion when in contact with moisture.

Frequently purchased with this product - 50cc Syringes, Vinyl Gloves.

Web Page - click here

To go to the top of this Page - click here


Polyurethane Rapid Expanding Injection Resin Prices

Or buy by phone 01626 872886

Polyurethane Liquid 1 litre bottle - £28.60 -

Injection requires injectors and syringes

Injectors, one way valved, 10mm diameter hole

Injector for injection of Rapid Expanding Polyurethane Resin

10 - £1.99 -

100 - £19.87 -

1000 - £198.66 -

Syringes to fit Injectors

Syringes for injecting Polyurethane Rapid Expanding Resin

10cc Syringe - £0.52 -

20cc Syringe - £0.75 -

50cc Syringe - £1.75 -

To go to the top of this Page - click here


Accessory Prices

Vinyl disposable gloves, box of 100 - £13.70 -

Plugs, to cap 10mm Injector Holes

£3.96 - pack of 25, grey -

£3.96 - pack of 25, brick red -

£3.96 - pack of 25, stone/cream -

To go to the top of this Page - click here


Mouldable Epoxy Putty - structural filler

Waterproof repair putty, which can be coloured, moulded, shaped, sanded and painted.

It can also be used like a mortar, to fill cracks and holes in masonry, or as a glazing putty for windows.

Special use - Joist notches, holes and slots cut by Electricians and Plumbers - click here to see the full repair technique

Smooth to perfection - use our Smoothing Spray on you spreader or knife - click here for Smoothing Spray

Repairs stone - can be shaped to repair statues and moldings.

It is a waterproof molding putty which can act as a sealant and a repair filler, for crack filling in masonry, brick, stone, wood and concrete.

Mixing Epoxy PuttyMixed ball of Epoxy PuttyDark brown mouldable Epoxy Putty

Mixing two Epoxy Putty parts in the gloved hand.

The finished ball of Epoxy Putty ready to use.

Coloured Epoxy Putty after the addition of black mortar powder.

Click here for Data Sheet

Sizes - 500cc and 1000cc (1 litre)

Uses - fills and structurally repairs wood, brick, stone, concrete, some plastics and bonds most metals. Will set underwater. Waterproof and weatherproof.

Mixing - simply take equal portions in wetted gloved hands and mix together, like window putty or bread dough, until a perfectly even colour. Apply with a pallet knife or by hand placing. Use a wetted seam roller to smooth.

Colouring - You can add small pinches of our Colouring Powder to the mixed Epoxy Putty to achieve a match with the repair area. Black, brown, red and white powders can be blended or used individually.

Usage rate - 1 litre of putty will fill a hole 4 inches x 4 inches x 4 inches (100mm x 100mm x 100mm).

Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed vinyl), Epoxy Remover Fluid, Smoothing Roller, Pallet Knife, Colour Powder.

Web Page - click here

To go to the top of this Page - click here


Epoxy Mouldable Putty Prices

Or buy by phone 01626 872886

500cc of putty - £14.85 -

1 litre of putty - £24.60 -

Accessory Prices

Colouring Powders 50g

Black - £2.95 -

Brown - £2.95 -

Red - £2.95 -

Buff - £2.95 -

White - £2.95 -

Colour Liquid Pigments

£5.78 for all colours - Liquids

Liquid Grey - for 400cc -

Liquid Red - for 400cc -

Liquid Black - for 400cc -

Liquid White - for 400cc -

Liquid Beige - for 400cc -

Liquid Blue - for 400cc -

 

Epoxy Cleaner/Remover Fluid and Smoothing Spray

For cleaning tools and removing splashes of uncured resin

Epoxy Cleaning/Remover Fluid 250cc can - £7.67 -

Smoothing Spray

Epoxy Smoothing Fluid 125cc spray bottle - £4.99 -

 

Putty Knife and Gloves

Knife for smoothing and forming shapes - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

Click for Accessories section to see other useful extras

To go to the top of this Page - click here


Rebuild Resin - structural resin

A two part Epoxy filler for fine surface filling of structural timber, window frames and other joinery. Easy to smooth to a precise shape. Can be sanded and painted.

Rebuiod Resin in Cartridges or PotsNixing Rebuilo Resin from two pot 500cc kit

Click here for Data Sheet

Size - 400cc and 380cc twin tube cartridges, or 400cc in two pots

Uses - repair window frames, door frames, timber frames or other wooden structures. Use Ultra Thin Epoxy Primer/Stabiliser liquid to consolidate damaged timber.

Can be used as an adhesive to bond timber pieces into frames.

Mixing - this filler/adhesive consists of two soft, creamy materials, which can optionally be gunned onto a mixing board to give a perfect mix ratio. Mix with a putty knife. There is no shrinkage and it is totally waterproof. This is a professional repair material, as used by window frame repair specialists.

Rot Protection - finish the job off with our Boron Paste and Boron Rods - these provide internal rot and insect attack protection by dissolving inside the timber. See our Boron Shop for details.

Usage rate - 380cc will fill a 10mm x 100mm slot for a length of 380mm. 400cc will fill 10mm x 100mm slot for a length of 400mm.

Frequently purchased with this product - Ultra Thin Epoxy Primer/Stabiliser, Professional 380cc Skeleton Gun, Spare Mixing Nozzles, Vinyl Gloves, Epoxy Primer.

A suitable dual piston Skeleton gun gives a precise mix ratio for consistent results.

Web Page - click here

To go to the top of this Page - click here


Rebuild Resin Prices

Rapid and Standard setting versions

Or buy by phone 01626 872886

Standard Set 3:1 mix ratio, two pots

Rebuild Resin 400cc - £21.58 -

Standard Set 3:1 mix ratio, in a side by side cartridge

Rebuild Resin 380cc twin tube - £37.28 -

Rapid Set 1 hour in 1:1 mix ratio, in a side by side cartridge

Rebuild Resin Rapid Set 1 hour 380cc twin tube - £39.87 -

Both types of Cartridge Tube require a different special skeleton gun

Ultra Thin Epoxy Primer/Stabiliser Liquid

Ultra Thin 225cc - £19.86 -

To go to the top of this Page - click here


Accessory Prices

For Standard Set Rebuild Resin - Skeleton Gun 3:1 - £32.00 -

For Rapid Set Rebuild Resin - Skeleton Gun 1:1 - £32.00 -

Epoxy Cleaning/Remover Fluid 250cc can - £7.67 -

Epoxy Smoothing Fluid 125cc spray bottle - £4.99 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

To go to the top of this Page - click here


Window Frame Repair - starter pack

A set of materials for repairing wooden window frames and other joinery. Easy to smooth to a precise shape. Can be sanded and painted.

Nixing Rebuilo Resin from two pot 500cc kitMixing Epoxy PuttyUltra Thin Epoxy Resin Primer  Consolidator

Products included - Rebuild Resin (400cc), Epoxy Putty (500cc) and Ultra Thin Epoxy Primer/Consolidator (225cc) low viscosity.

Uses - repair window frames, door frames, timber frames or other wooden structures. Use Ultra Thin Epoxy Primer/Stabiliser liquid to consolidate damaged timber.

Can be used as an adhesive to bond timber pieces into frames.

Rot Protection - finish the job off with our Boron Paste and Boron Rods - these provide internal rot and insect attack protection by dissolving inside the timber. See our Boron Shop for details.

Frequently purchased with this product - Vinyl Gloves, Epoxy Cleaner/Remover

Web Page - click here

To go to the top of this Page - click here


Window Frame Repair Pack Prices

Or buy by phone 01626 872886

500cc of Epoxy Putty - £14.85 -

Rebuild Resin 400cc - £21.58 -

Ultra Thin 225cc - £19.86 -

Epoxy Cleaning/Remover Fluid 250cc can - £7.67 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

Web Page - click here

To go to the top of this Page - click here


Injectors, one way valved, for narrow cracks and hidden voids

Plastic hammer-in injectors incorporating internal one way valves.

Click here for Data Sheet

Requires a syringe with a 4mm diameter outlet.

Hole Size - 10mm diameter x 40mm

Uses - for injecting various resins deep into wood, concrete, brick, render or stone.

Warning - ensure that ALL dust is blown or vacuumed out completely. Injection into dust does not work.

Fitting - drill holes at least 40mm deep if you want to flush fit the Injector. Remove all dust from the holes. After injection the Injector can be knocked in further, drilled out or left exposed - fill over using Epoxy Putty, or insert our Plastic Plugs to give a flush finish.

Usage rate - typically, insert one Injector every 100mm to 150mm.

Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed vinyl), Syringes, Plugs, Epoxy Remover Fluid, Epoxy Putty.

Syringes required for injection

Sizes - 10cc, 20cc and 50cc. Outlet outside diameter 4mm.

Measuring - for dosing liquid Epoxies, such as Epoxy Primer, to maintain the correct mix ratios (keep one syringe with each part - Activator and Base).

Injecting - for injecting liquid and Thixotropic Epoxies, such as Epoxy Primer or Thixotropic Injection Resin, into small holes in order to fill fine cracks or hollow sections behind cracked plaster, render or tanking.

Web Page - click here

To go to the top of this Page - click here


Injector Prices

Or buy by phone 01626 872886

10 - £1.99 -

100 - £19.87 -

1000 - £198.66 -

Syringes to fit Injectors

Buy 10cc Syringe - £0.52 -

Buy 20cc Syringe - £0.75 -

Buy 50cc Syringe - £1.78 -

You can also use these Injectors to provide internal rot and insect attack protection in wood by injecting a Boron Paste inside the timber. See our Boron Shop for details.

To go to the top of this Page - click here


Accessory Prices

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

Epoxy Cleaner/Remover Fluid

For cleaning tools and removing splashes of uncured resin

250cc can - £7.67 -

Plugs, to cap 10mm Injector Holes

£3.96 - pack of 25, grey -

£3.96 - pack of 25, brick red -

£3.96 - pack of 25, stone/cream -

To go to the top of this Page - click here


Epoxy Primer/Consolidator

A two part, thin clear Epoxy resin for priming and consolidating masonry and wood.

Can be brushed as a coating or pouring to form a solid seal or joint material e.g. Glass balustrade bottom fix.

Ultra Thin Epoxy Liquid Consolidator/Hardener/Sealer has very low viscosity.

A two part, very thin Epoxy resin for soaking into fine cracks and damaged materials to make them harder and water proof.

Priming wood ready for Timberbuild

Click here for Data Sheet

Sizes - 225cc (Ultra Thin only), Primer in 500cc and 1000cc (1 litre)

Uses - Epoxy Primer should always be used before applying Mouldable Epoxy Putty onto smooth timber, planed timber, hardwoods, stone, brick, concrete or render. (However, on dust free rough or well dugout softwood timber it is not strictly required).

Preparation - ensure that ALL rotted wood is cut out completely. Filling over rot is a waste of money.

Mixing - mix the two liquids thoroughly together in the ratio 2 Base to 1 Activator until a perfectly even colour. Pour into another clean container and re-mix. Apply with a brush, or by pouring.

Usage rate - 1 litre of Epoxy Primer will cover 1 square metre at a thickness of 1mm, or about 6 square metres at a normal paint film thickness.

Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed vinyl), Syringes.

Web Page - click here

To go to the top of this Page - click here


Epoxy Primer and Ultra Thin Epoxy - prices

Or buy by phone 01626 872886

Ultra Thin 225cc - £19.86 -

500cc Primer - £22.47 -

1000cc Primer - £35.85 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

For measuring part pots for small mixes syringes are very useful.

To go to the top of this Page - click here


Accessory Prices

Pallet Knife for mixing - £9.95 -

10cc Syringe - £0.52 -

20cc Syringe - £0.75 -

50cc Syringe - £1.78 -

Measuring - for dosing liquid Epoxies, such as Epoxy Primer, to maintain the correct mix ratios (keep one syringe with each part - Activator and Base).

Injecting - for injecting liquid and Thixotropic Epoxies, such as Epoxy Primer or Thixotropic Injection Resin, into small holes in order to fill fine cracks or hollow sections behind cracked plaster, render or tanking.

To go to the top of this Page - click here


Rods and Bars - GRP and Carbon, Zinc Plated Steel Allthread, Helical Stainless Steel

Resin Repair in a dugout Oak Beam

Uses - reinforcement of timber beams, brick, concrete and stone structures.

Epoxy-Glass Bars - supplied in 1 metre lengths

Available in 6, 8, 10, 13, 16mm diameters

Uses - reinforcement of timber beams, brick, concrete and stone structures.

GRP Bars - cut from 1 metre, 2 metre or 3 metre lengths

Available in 6, 8 10, 12, 16 and 20mm diameters

Zinc Plated High Tensile Steel Allthread - cut from 3 metre lengths

Available in 12, 16, 20, 25mm diameters

Helical Stainless Steel Bar

Available in 6mm and 8mm diameters, 1 metre or 7 metre lengths. Each 1 metre length will make one typical brickwork or blockwork 'stitch'.

Click to go to the top of the page


Prices - Bars for reinforcement

GRP and Carbon Bars per metre

Call 01626 872886 for prices

6mm x 1 metre

8mm x 1 metre

10mm x 1 metre

12mm x 1 metre

16mm x 1 metre

20mm x 1 metre

2 metre and 3 metre length options, or cut to Order

High Tensile Bright Zinc Plated Steel per metre

Call 01626 872886 for prices

12mm BZPHT Steel Allthread

16mm BZPHT Steel Allthread

20mm BZPHT Steel Allthread

25mm BZPHT Steel Allthread

Zinc Plated High Tensile Steel Allthread - cut from 3 metre lengths

Available in 12, 16, 20, 25mm diameters

Helical Stainless Steel Bar - supplied in 1 metre and 7 metre lengths

Stainless Steel Helical Bar

Available in 6mm and 8mm diameters. Each 1 metre length will make one typical brickwork or blockwork 'stitch'.

Click here for Data Sheet for Epoxy Glass Bars

Web Page - click here

To go to the top of this Page - click here


Helical Bar - stainless steel prices

Or buy by phone 01626 872886

6mm x 1 metre - £4.88 per metre -

To go to the top of this Page - click here


Empty Cartridge Tubes - with pistons and nozzles

Sizes

400cc - 250mm/10 inches long tube, with piston and pointed nozzle

1000cc - 250mm/10 inches long tube, with piston and pointed nozzles

Cartridge Kit - 1000cc - for Epoxy Resins

Uses - these Cartridge Kits are supplied empty ready to hand fill with our Structural Epoxy Pouring Resin (by pouring) or with our Thixotropic Injection Resin by using the 'pusher plate' supplied with the Kit.

Filling - the pusher plate drops into the pot containing the mixed resin and allows the open end of the tube to be pushed down into the pot, filling itself as it goes down.

Frequently purchased with this product - 400cc or 1000cc Skeleton Gun, Extension Injection Tubes - ring us to discuss your exact requirements.

Web Page - click here

To go to the top of this Page - click here


Empty Cartridge Tube Kit prices

Or buy by phone 01626 872886

400cc Cartridge Tube Kit - £2.25 -

1000cc Cartridge Tube Kit - £4.85 -

You can specify the length of extension tube that you require. They are available in the following diameters: outer tube diameter - 8mm, 10mm and 15mm. (Other sizes - specially made to order).

To go to the top of this Page - click here


Empty Cartridge Tubes - fitted with a Needle - with pistons and nozzles

400cc Cartridge Tube with Needle inject a Brick

Size - 400cc - 250mm/10 inches long tube, with piston and Needle - 2mm diameter x 30mm long.

Uses - these Cartridge Kits are supplied empty ready to hand fill with our Thixotropic Injection Resin Slow Set by using the 'pusher plate' supplied with the Kit.

Filling - the pusher plate drops into the pot containing the mixed resin and allows the open end of the tube to be pushed down into the pot, filling itself as it goes down.

Web Page - click here

To go to the top of this Page - click here


Empty Cartridge Tube Needle Nose - Kit

Or buy by phone 01626 872886

400cc Kit - £7.98 -

To go to the top of this Page - click here


Extension Nozzle Tubes for injection to fit cartridge

Sizes - to fit either the 400cc or 1000cc Cartridge Tubes, with differing length extensions to suit the hole depth.

Extension Nozzle for 400cc Cartridge

Uses - to extend the Cartridge Nozzle so that holes can be injected with resin correctly - from the hole base outwards. This minimizes the risk of air voids within the resin, a cause of bond weakness.

Specials - we can fit varying lengths of tubing to the threaded adapters to suit your job. Please call us on 01626 872886 .

To go to the top of this Page - click here


Extension Nozzle Prices

Or buy by phone 01626 872886

8mm Diameter Extension Nozzles -

400mm long - for 400cc Tube - £4.65 -

10mm Diameter Extension Nozzles -

400mm long - for 400cc Tube - £4.85 -

400mm long - for 1 Litre Tube - £6.25 -

15mm Diameter Extension Nozzles -

400mm long - for 400cc Tube - £7.50 -

400mm long - for 1 Litre Tube - £7.50 -

The Diameter given is the outer dimension (OD) of the tubing.

To go to the top of this Page - click here


Accessory Prices

Plastic Plugs

Domed, push in, for 10 -12mm.diameter holes

Plastic Plugs for hole filling. Three colours available.

Uses - for capping holes drilled in wood or masonry.

Colours - Cement Grey, Brick Red, Stone/Cream.

Frequently purchased with our 10mm and 12mm Masonry Bits and 10mm and 12mm Wood Auger Bits.

pack of 25, grey - £3.96 -

pack of 25, brick red - £3.96 -

pack of 25, stone/cream - £3.96 -

To go to the top of this Page - click here


Skeleton guns to fit our Cartridges

400cc Skeleton Gun - for injection using UltraCure 400cc and all other products in single tubes, 280cc to 400cc

Skeleton Gun -  400cc - single tube

1000cc Skeleton Gun - Special 1 Litre gun for injection using UltraCure 1000cc or other 1 Litre products.

Skeleton Gun - 1000cc - single tube

380cc 1:1 to 3:1 Skeleton Gun - gun for injecting Pure Epoxy Resin and similar side by side resin cartridges.

Timberbuild Skeleton Gun

To go to the top of this Page - click here


Skeleton Gun Prices

Or buy by phone 01626 872886

310/400cc - £16.50 -

1000cc - £26.98 -

380cc/1:1 to 3:1 gun - £32.00 -

To go to the top of this Page - click here


Accessory Prices

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

To go to the top of this Page - click here


Tools - All Metal Chisels - deep slot clearance

All Steel Chisel - standard length 14 inches - also available extended

All Steel Chisels

All Metal Chisels, made of solid steel, can be used with lump hammers and as levers, to clean out slots and tidy up previously roughly cut out cavities in wood.

To go to the top of this Page - click here


All Steel Chisel Prices

Standard length;

30mm wide - £19.87 -

Extended length

30mm wide - £39.87 -

To go to the top of this Page - click here


Liquid Membranes - waterproof brush on coating, indoors & outdoors.

Epoxy Seal Coating

Epoxy Seal Coat clearEpoxy Seal  Coat GreyConcrete before and after applying Epoxy Seal Coat Grey

Click here for Data Sheet

Click here for help with sealing floors.

Sizes - 1 litre, 2.5 litre, 5 litre - colour choice - clear and grey.

Uses - waterproofs, seals and provides a tough vapour barrier membrane on concrete, render, stone, brick and quarry tiles. Apply by brush or roller. Pure epoxy - no solvents, no water.

Ultra Epoxy Seal coating is perfect for sealing damp concrete floors, damp screeds, damp slab and tiled floors, to prevent the passage of moisture and moisture vapour.

Can be used to prepare old or new concrete or screeded floors for direct laying of wooden floors. It acts as a complete vapour barrier.

Mixing - mix the two liquids thoroughly together in the ratio 2 Base to 1 Activator until a perfectly even colour using a paddle in an electric drilling machine. Pour into another clean container and re-mix. Apply with a brush, or by pouring.

Blinding - use our Grit in the top coat to provide a rough surface for adhesive, if you intend fitting a tiled or bonded flooring of any kind.

Coverage Rate - up to 2.5 square metres per litre on smooth surfaces.

Colours - clear (not water white clear), the Grey is RAL7042.

Frequently purchased with this product - Disposable Vinyl Gloves, Mixing Paddle

Web Page - click here

To go to the top of this Page - click here


Ultra Epoxy Seal Coat Prices

Or buy by phone 01626 872886

Epoxy Seal Coating Clear - 5 litre - £124.47 -

Epoxy Seal Coating Clear - 2.5 litre - £66.35 -

Epoxy Seal Coating Clear - 1 litre - £38.65 -

Epoxy Seal Coating Grey - 5 litre - £128.42 -

Epoxy Seal Coating Grey - 2.5 litre - £68.24 -

Epoxy Seal Coating Grey - 1 litre - £38.65 -

To go to the top of this Page - click here


Accessory Prices

Grit for making Epoxy Seal Coat ready for tiling adhesive

Blinding Grit for Epoxy Seal Coat for tiling over - gives the adhesive a grip

16 Grit - 1mm to 2mm grit size - £3.07 per kilo -

12 Grit - 2mm to 3mm grit size - £3.07 per kilo -

Mixed Grit - 1mm to 3mm grit sizes - £3.47 per kilo -

Mixing Paddle - £4.65 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

Epoxy Cleaner/Remover Fluid

For cleaning tools and removing splashes of uncured resin

250cc can - £7.67 -

To go to the top of this Page - click here


Garage Floor, Drive and Ramp Resin - Ultra Heavy Duty

Use indoors and outdoors - two pack Epoxy, Clear Primer and Grey Top Coat

Concrete before and after applying Epoxy Seal Coat Grey

Epoxy Seal  Coat GreyGritted Driveway Resin

Click here for Data Sheet

Size - 5 litre and 10 litre, Primer & Grey Base

Uses - Garage and Drive Resin is perfect for sealing damp concrete and asphalt garage floors and drives , and for surface grit finishes. Only used washed, dry grit or pebbles if you want a textured surface.

Can be used to bond grits to old or new concrete or asphalt, in conjunction with our Driveway Primer. Do not exceed 3mm grit or aggregate (pebble) size. The aggregate MUST BE WASHED and dust free.

Coverage Rates

Primer - up to 2 square metres per litre on a smooth surface.

Base - up to 4 square metres per litre on a smooth surface.

Coats - start on a warm dry day in the morning to avoid overnight Condensation. Apply 1 coat of Driveway Primer. Allow to fully harden. Within 48 hours of being hard and tack free apply 1 coat of Driveway Base Resin. Allow to harden. Within 48 hours of being hard and tack free apply another coat of Driveway Base Resin and whilst this coat is still wet immediately cover in dust free washed dry grit or stone aggregate having a maximum diameter of 3mm.

Curing and first use - do not allow vehicles onto the drive for a minimum of 48 hours, provided that the temperature has not fallen below 10 degrees Centigrade. Test for hardness before proceeding. Low temperatures may require many days of extra curing time. Use our Memory Thermometer to monitor conditions.

Frequently purchased with this product: Mixing Paddle, Disposable Vinyl Gloves, Memory Thermometer/Hygrometer.

Web Page - click here

To go to the top of this Page - click here


Garage Floor, Drive and Ramp Resin Prices

Or buy by phone 01626 872886

Primer

Garage & Drive Primer - Clear .

Primer up to 10 square metres - 5 litre - £83.85 -

Primer up to 20 square metres - 10 litre - £149.86 -

Base Coat

Garage & Drive Base Finish - Grey

Base Finish up to 20 square metres - 5 litre - £94.60 -

Base Finish up to 40 square metres - 10 litre - £162.40 -

Grit for Driveway Coating

Mixed Grit - 1mm to 3mm grit sizes -

Natural colour - £3.47 per kilo -

To go to the top of this Page - click here


Accessory Prices

Mixing Paddle - £4.65 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

Epoxy Cleaner/Remover Fluid

For cleaning tools and removing splashes of uncured resin

250cc can - £7.67 -

To go to the top of this Page - click here


Crack Repair Kit - includes helical bar, grout and applicator gun

Crack Repair Kit for walls

Click here for more information

Size - 3 litre Grout, 10 metres of bar

For repairing cracks in masonry and concrete.

The Kit contains: 10 x 1 metre lengths of Helical Bar, 3 litres of W60 Flexi Grout, Injection Applicator Gun (yellow), Pointing Tool and Mixing Paddle.

Usage rate - will form up to 10 x 1000mm horizontal stitches in brickwork, for example.

To go to the top of this Page - click here


Crack Repair Stitching Kit Prices

Or buy by phone 01626 872886

Crack Repair Kit - £96.50 -

Injection Grout Gun - £29.60 -

To go to the top of this Page - click here


Accessory Prices

Mixing Paddle - £4.65 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

To go to the top of this Page - click here


Timber Repair Kit - Timber-Resin Splices made to order - any size

Timber-Resin splice Kit for Structural Timber Repair

Click here for more information

For repairing timber beams, lintels, rafters, tie beams, carrier beams, joists and bressumers. These bespoke beam kits contain a new, laminated structural timber, made in kiln dried wood to C24 Grade or higher, fitted with connector bars made from zinc plated 8.8 Grade High Tensile Allthread bar. Pouring or injection resins are also included.

Engineering - free Design, Method Statement and Tools List (Hire available).

Frequently purchased with this product - additional Structural Pouring Resin

£ POA - price on application, Free Quotation - call Angela or David on 01626 872886

Have a look at full details of the Timber-Resin Splice System at:

www.timber.org.uk and www.timber-repair.co.uk

Or buy by phone 01626 872886

To go to the top of this Page - click here


Epoxy Adhesive Paste - Oxybond

Supplied as two pastes to mix together 1:1.

Epoxy Adhesive Paste

Click here for Data Sheet

Sizes - 1 litre and 10 litres

Mixing - mix using a pallet knife, by hand, or in bulk using a paddle in an electric drilling machine.

Uses - for laminating and bonding flooring materials to concrete or to each other. Also used for wooden flooring, oak flooring, tile bonding, slate laying. Completely waterproof and structural. Can be used as a combined adhesive and waterproof Membrane. Flexible enough to accommodate oak and other wooden flooring materials, even over under floor heating.

Usage rate - by volume - allow about 1 litre per square metre on smooth surfaces - for example a 6.25 litre pack will give about 6 square metres at 1mm thickness, but for rough surfaces you may need 2mm or even 3mm of thickness. Use a smooth plastic spreader. Can be used as a continuous coating or in 'dabs'.

Frequently purchased with this product Pallet Knife, Vinyl Gloves (Box of 100), Mixing Paddle.

Web Page - click here

To go to the top of this Page - click here


Oxybond Epoxy Adhesive Paste/Flooring Adhesive Prices

Or buy by phone 01626 872886

10 litres of adhesive - £158.00 -

1 litre of adhesive - £18.76 -

To go to the top of this Page - click here


Accessory Prices

Mixing Paddle - £4.65 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

Pallet Knife - £9.95 -

Epoxy Cleaner/Remover Fluid

For cleaning tools and removing splashes of uncured resin

250cc can - £7.67 -

To go to the top of this Page - click here


Epoxy Patching Mortar for patching holes in floors and walls - waterproof

Structural, waterproof and flexible. This is a three part (two epoxy liquids, one powder) mortar.

Should be used in conjunction with our Epoxy Primer, to ensure a good bond.

Use our Smoothing Spray on trowels and metal floats to make finishing easier.

Epoxy Patching Kit for cracks and holes in masonry

Click here for Data Sheet

Size - 2.5 litre

Mixing - mix using a pallet knife, by hand.

Uses - for filling holes in flooring materials - e.g. concrete. Also used for joint repairs in slate, block, slabs and brick. Completely waterproof and structural.

Usage rate - by volume - a 2.5 litre pack would fill a hole 25mm deep across an area of about 300mm x 330mm. (Approximately 1 inch x 12 inches x 12 inches)

Web Page - click here

To go to the top of this Page - click here


Epoxy Patching Mortar Prices

Or buy by phone 01626 872886

2.5 litres - £31.77 -

To go to the top of this Page - click here


Accessory Prices

500cc Primer - £22.47 -

1000cc Primer - £35.85 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

For measuring part pots for small mixes syringes are very useful.


EpoxySmoothing Spray Fluid

Uses - for cleaning and wetting tools to make them glide over epoxies (e.g Mouldable Epoxy Putty, Epoxy Patch) to create a smooth surface.

Supplied as - a Spray Bottle of 125cc

125cc spray bottle - £5.67 -

Epoxy Cleaner/Remover Fluid

For cleaning tools and removing splashes of uncured resin

250cc can - £7.67 -

To go to the top of this Page - click here


Tanking Slurry Powder for sealing masonry and concrete

BBA Certificated.

Slurry Tanking onto Concrete Block

Click here for help with sealing floors and walls

Size - 20kgs plastic tub

Uses - for coating masonry, brick, stone, floors and walls.

Mixing - mix with water to form a 'slurry' - a smooth, brushable thick paint, like masonry paint.

Application - wet the surfaces first and allow to dry until just damp. Brush on one coat, with horizontal brush strokes and allow to dry. Re-damp before re-coating, if dried right out. Apply a second coat, brushing vertically. This eliminates the risk of missed patches and pinholes. Slurry can be rendered over whilst wet, or prime with another coat, or use BondaAcryl as a primer.

Usage rate - 3 to 5 square metres per 20kgs, per coat, subject to surface roughness.

Also Required when Tanking - Universal Mortar Joint Filling Mix - Fillet Seal, (for the floor to wall gap joint), Waterstop - Hydraplug, (for instant leak and weep sealing).

Usage rates - Universal Mortar Joint Filling mix - mix with water to produce a stiff mortar, allow 1kg per 1 metre of joint approximately 25mm x 25mm (1 inch x 1 inch) at the floor to wall joint, or in cracks and voids.

Frequently purchased with this product - Universal Mortar Fillet Seal, Waterstop Hydraplug, Bondacryl.

Web Page - click here

To go to the top of this Page - click here


Tanking Products Prices

Or buy by phone 01626 872886

Hydradry BBA Tanking Slurry Powder, 20kgs - £47.16 -

Universal Joint Filling Mix, 25kgs - £53.60 -

Waterstop Hydraplug, 5kgs - £23.98 -

To go to the top of this Page - click here


Accessory Prices

Mixing Paddle - £4.65 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

To go to the top of this Page - click here


Joint, Crack and Gap Sealing

Universal Mortar Fillet Seal - waterproof cement based mortar

Always cut out cracks or floor to wall joints to a square shouldered slot. Do not simply lay a fillet of Jointfill over the existing crack or gap - this will fail.

Cut our cracks to a square shouldered slot

Click here for more information

Size - 25kgs plastic keg

Uses - for waterproof filling of cracks in masonry, brick, stone, floors and walls.

Mixing - mix with water to form a smooth, stiff mortar. Wet all the repair surfaces first and allow to dry until just damp. Apply a coat of BondAcryl by brush and immediately lay in the Jointfill with a trowel. Smooth to flush.

Usage rate - approximately 1 metre of 25mm x 25mm (1 inch x 1 inch) slot per 1kg of Jointfill powder. So, one 25kg keg will make about 15 litres of joint filling mortar, when mixed with minimal water.

Also Required when Tanking - Waterstop - Hydraplug, (for instant leak and weep sealing).

Frequently purchased with this product - Tanking Powder, Hydraplug and Bondacryl.

NOTE - Floor to wall joints

These are always one of the weakest parts of construction and are frequently left unfinished.

This gap then bleeds water vapour, which can be sucked up the back of the skirting boards (which may rot) and into the wall plaster. Use our Jointfill or W60 Flexi Grout to fill the gap properly

Web Page - click here

To go to the top of this Page - click here


Universal Mortar Fillet Seal Prices

Or buy by phone 01626 872886

Joint Filling Mix, Fillet Seal - 25kgs - £53.60 -

Waterstop Hydraplug - 5kgs - £23.98 -

To go to the top of this Page - click here


Crack Filling Flexible Grout - flexible cement based mortar

Always cut out cracks or floor to wall joints to a square shouldered slot. Do not simply lay a fillet of Flexi Grout over the existing crack or gap - this will fail.

Crack filling  - powder to mix, apply with a grouting tool or trowel

Click here for more information

Uses - for repointing wall joints and filling cracks in masonry, brick, stone, floors and walls.

Mixing - mix with water to form a smooth, stiff mortar. Wet all the repair surfaces first and allow to dry until just damp. Apply a coat of BondAcryl by brush and immediately lay in the Flexi Grout with a trowel. Smooth to flush.

Usage rate - approximately 1 metre of 25mm x 25mm (1 inch x 1 inch) slot per 1kg of Flexi Grout powder. So, one 3 litre bucket will make about 15 litres of joint filling mortar, when mixed with minimal water.

Frequently purchased with this product - Tanking Powder, Hydraplug and Bondacryl.

Web Page - click here

To go to the top of this Page - click here


Crack Filling Flexible Grout Prices

Or buy by phone 01626 872886

Does not include tools - see complete kit above

Grout pack, powder and liquid, 3 litres - £42.12 -

To go to the top of this Page - click here


Accessory Prices

Hydradry BBA Tanking Slurry Powder, 20kgs - £47.16 -

Universal Joint Filling Mix, 25kgs - £53.60 -

Waterstop Hydraplug, 5kgs - £23.98 -

Mixing Paddle - £4.65 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

Injection Grout Gun - £29.60 -

To go to the top of this Page - click here


Bondacryl Bonding Liquid for sand and cement mixes

Waterproofing, priming, shrink reduction, tanking

Bondacryl for priming masonry

BondAcryl is a Primer for concrete, stone, brick, render and Tanking

Click here for Data Sheet - front

Click here for Data Sheet - back

Sizes - 2.5 litres, 5 litres, 25 litres

Uses - priming, tanking, in sand and cement mixtures.

Priming - mix with cement powder only to create a waterproof primer for new concrete, render or mortar patches.

Tanking Applications - for priming areas ready to receive Jointfill Fillet Seal (to ensure good bonding and eliminate poor or excessive suction), or to prime over Tanked surfaces ready for Render coats of sand and cement.

General Purpose - Bonds repair mortar (sand and cement) to old concrete or render, when used as a primer. Makes a sand and cement mix waterproof, when used instead of water. Allows 'screeds' to be laid much thinner than normal - down from 50mm to 12.5mm.

Usage rate - see our guide in the Data Sheet - click here.

Web Page - click here

To go to the top of this Page - click here


BondAcryl Bonding Liquid Prices

Or buy by phone 01626 872886

Bondacryl - 2.5 litre - £18.96 -

Bondacryl - 5 litre - £28.94 -

Bondacryl - 25 litre - £98.88 -

To go to the top of this Page - click here


Accessory Prices

Mixing Paddle - £4.65 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

To go to the top of this Page - click here


Accessories

Or buy by phone 01626 872886

Hole Cleaning Brush

Hole cleaning brush - for cleaning out holes for resin

Size - 275mm long, minimum hole diameter 5mm.

Uses - for cleaning out holes and slots prior to resin injection, in order to removed loose material and dust. Use the Hole Cleaning Pump to finish dust removal.

Brush - £2.99 -

To go to the top of this Page - click here


Hole Cleaning Pump

Hole cleaning pump - for blowing out holes for resin

Uses - for blowing out holes and slots prior to resin injection, in order to removed loose material and dust. Use the Hole Cleaning Brush first.

Pump - £4.99 -

To go to the top of this Page - click here


Syringes

Syringes - for measuring resin liquids or for injecting resins

Sizes - 10cc, 20cc and 50cc. Outlet outside diameter 4mm.

Uses

Measuring - for dosing liquid Epoxies, such as Epoxy Primer, to maintain the correct mix ratios (keep one syringe with each part - Activator and Base).

Injecting - for injecting liquid and Thixotropic Epoxies, such as Epoxy Primer or Thixotropic Injection Resin, into small holes in order to fill fine cracks or hollow sections behind cracked plaster, render or tanking.

Syringes, no needles

10cc Syringe - £0.52 -

20cc Syringe - £0.75 -

50cc Syringe - £1.78 -

Syringes with Needles

10cc Syringe+ Needle - £1.52 -

20cc Syringe+Needle - £1.75 -

50cc Syringe+Needle - £2.78 -

Spare Needles - £1.25 -

To go to the top of this Page - click here


Smoothing Roller

Smoothing roller for Mouldable Epoxy Putty

Uses - for smoothing Mouldable Epoxy Putty

Roller - £2.50 -

To go to the top of this Page - click here


Epoxy Cleaning/Removing Fluid

Epoxy Remover Fluid  - a solvent cleaner for tools and surfaces for uncured resin

Click here for more information

Uses - for removing uncured Epoxy Resins from surfaces and tools, as well as pre cleaning surfaces and holes for epoxy application.

250cc can - £7.67 -

To go to the top of this Page - click here


EpoxySmoothing Fluid

Uses - for cleaning and wetting tools to make them glide over epoxies (e.g Mouldable Epoxy Putty, Epoxy Patch) to create a smooth surface.

Supplied as - a Spray Bottle of 125cc

125cc spray bottle - £5.67 -

To go to the top of this Page - click here


Colouring Additives

Uses - add small quantities (5% or less of the total mix by volume) to Mouldable Epoxy Putty, Thixotropic Injection Resins.

Thixotropic Resin in natural sand colour

Natural yellow sand colour

Use with Epoxy Putty and Epoxy Patching Kit

Additive in Red - mixed into resin

Additive in Red - mixed into Thixotropic resin

Also available in Red and Black.

£5.78 for Liquids

Liquid Grey - for 400cc -

Liquid Red - for 400cc -

Liquid Black - for 400cc -

Liquid White - for 400cc -

Liquid Beige - for 400cc -

Liquid Blue - for 400cc -

 

Colouring Powders 50g

Black - £2.95 -

Brown - £2.95 -

Red - £2.95 -

Buff - £2.95 -

White - £2.95 -

To go to the top of this Page - click here


Flexible Rubber Mixing Pot

One pot - £2.50 -


Plastic Plugs

Domed, push in, for 10 -12mm.diameter holes

Plastic Plugs for hole filling. Three colours available.

Uses - for capping holes drilled in wood or masonry.

Colours - Cement Grey, Brick Red, Stone/Cream.

Frequently purchased with our 10mm and 12mm Masonry Bits and 10mm and 12mm Wood Auger Bits.

pack of 25, grey - £3.96 -

pack of 25, brick red - £3.96 -

pack of 25, stone/cream - £3.96 -

To go to the top of this Page - click here


Grit for Brake Testing Rollers

16 Black Grit - 1mm to 2mm grit size - coarse

16 Grit - £3.07 per kilo -

12 Black Grit - 2mm to 3mm grit size - medium

12 Grit - £3.07 per kilo -

24 Black Grit - 0.71 mm to 1.0 mm grit size - fine

24 Grit - £3.07 per kilo -

Mixed Minerals Buff Coloured Grit - 1mm to 3mm grit sizes - coarse

Mixed Minerals Grit - £3.47 per kilo -

To go to the top of this Page - click here


Complete Repair Kits

1. Concrete - Patching

Epoxy Patching Mortar Kit

Concrete Patch repair Kit

Click here for more information

Includes: 2.5 litres of Epoxy Mortar, Box of 100 Uni Handed Vinyl Gloves, 1 litre of Epoxy Primer.

Patching, Kit No. 1 - £78.59 -

Additional Mortar - £31.77 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


2. Concrete - Hole Injection

Thixotropic Epoxy Resin

Thixotropic Hole Injection Kit

Standard set and Slow Set options

Click here for more information

Includes: 400cc Thixotropic Resin, 400cc Cartridge Kit, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves, Extension Tube 10mm x 400mm.

Injection, Kit No. 2 - £57.89 -

Additional Resin - £29.87 -

SLOW SET Injection Kit - £59.96 -

Additional SLOW SET - £31.80 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


3. Concrete - Fixing Bolts and Studs - allthread bar

Thixo Rapid mixes in a spiral nozzle - sets in 6 to 8 minutes.

Anchoring with Thixo Rapid Resin

Click here for more information

Includes: Thixo Rapid Resin, 280cc, Box of 100 Uni Handed Vinyl Gloves, Spare Mixing Nozzle.

Stud Fixings, Kit No. 3 - £27.38 -

Additional Thixo Rapid Resin per 280cc tube - £15.76 -

Spare Mixing Nozzles - £0.65 -

Box of 100 Disposable Vinyl Gloves - £13.70 -

Note - we can supply the high tensile Studs cut to any length, Nuts and Washers.


4. Concrete - Crack Filling

Epoxy Primer/Consolidator

Mouldable Epoxy Putty

Mixing Mouldable Epoxy Putty

Click here for more Primer information

Click here for more Putty information

Includes: 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

Crack Filling, Kit No. 4 - £60.54 -

Additional 1 litre Putty - £24.60 -

500cc Additional Primer - £22.47 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


5. Render, Plaster, Concrete - Inject Hollowness

Epoxy Primer/Consolidator Injection

Injecting hollow plaster and render

Click for more Information.

Includes: 0.5 litres of Epoxy Primer, 20cc Syringes - set of 3 (no needles), Box of 100 Uni Handed Vinyl Gloves.

Injection, Kit 5 - £35.69 -

500cc Additional Primer - £22.47 -

1000cc Additional Primer - £35.85 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


6. Rusty Steel - sheets, rods, beams, plate and reinforcement (rebar)

Owatrol Oil

Owatrol Oil neutralises rust

Click here for more information

Apply directly to stable rust - remove all loose rust and scale first.

Apply one or more coats. Allow to dry between coats. Apply sufficient coats that the final surface remains shiny.

0.5 litres of Oil - £16.40 -

5 litres of Oil - £128.34 -

Box of 100 Gloves - £13.70 -


7. Crack Filling in Render and Concrete

Epoxy Primer/Consolidator

Mouldable Epoxy Putty

Click here for more Information

Mixing Mouldable Epoxy Putty

Click here for more Putty information

Includes: 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

Crack Filling, Kit No.7 - £60.54 -

Additional 1 L Putty - £24.60 -

500cc Additional Primer - £22.47 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


8. Hollow Render or Plaster Injection

Epoxy Primer/Consolidator

Injecting hollow plaster and render

Click for more Information.

Includes: 0.5 litres of Epoxy Primer, 20cc Syringes - set of 3, Box of 100 Uni Handed Vinyl Gloves.

Injection, Kit No. 8 - £35.49 -

500cc Additional Primer - £22.47 -

1000cc Additional Primer - £35.85 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


9. Brick and Block Crack Stitching

Crack Stitching Kit

Crack Repair Kit for walls

Click here for more information

Includes: 10 x 1 metre lengths of Helical Bar, 3 litres of W60 Flexi Grout, Injection Applicator Gun (yellow), Pointing Tool and Mixing Paddle.

Crack Stitching, Kit No. 9.

Includes Tools as shown - £96.50 -

Box of 100 Gloves - £13.70 -


10. Brick, Block and Masonry Crack Filling

W60 Flexi Grout Only - tools optional

Crack filling  - powder to mix, apply with a grouting tool or trowel

Click here for more information

Includes: 3 litres of W60 Flexi Grout only.

Grout, Kit No. 10 - £42.12 -

Mixing Paddle - £4.65 -

Pallet Knife for mixing - £9.95 -

Vinyl Disposable Gloves, Box of 100 - £13.70 -

Injection Grout Gun - £29.60 -


11. Splits, Holes and Cracks in Wood

Epoxy Primer/Consolidator

Mouldable Epoxy Putty

Mixing Mouldable Epoxy Putty

Click here for more Primer information

Click here for more Putty information

Includes: 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

Wood Split Filling, Kit No. 11 - £60.54 -

Additional 1L Putty - £24.60 -

500cc Additional Primer - £22.47 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


12. Wood - Split Stitching

Thixotropic Epoxy Resin

Epoxy/Glass Bars

Wood split stitching kit

Click here for more Thixotropic Resin information

Click here for more Bars information

Includes: 10 x 6mm x 1 metre Helical Stainless Steel Bars, 400cc Thixotropic Resin, 400cc Cartridge Kit, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves, Extension Tube 10mm x 400mm.

Stitching, Kit No. 12 - £114.39 -

Additional 400cc Standard Resin - £29.87 -

SLOW SET Stitching Kit - £116.46 -

Additional 400cc SLOW SET Resin - £31.94 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


13. Loose and hollow Floor Tiles

Epoxy Primer/Consolidator

Click for more Information

Includes: 0.5 litres of Epoxy Primer, 5 x 20ml Syringes, 5 x Syringe Needles, 1 x 250ml Mixing Jug, 1 x 250cc Epoxy Cleaner Remover Fluid, 1 x Box of 100 Uni Handed Vinyl Gloves.

Injection, Kit 13 - £52.60 -

500cc Additional Primer - £22.47 -

1000cc Additional Primer - £35.85 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


15. Black Epoxy Putty

Use with Epoxy Primer/Consolidator

Epoxy Putty Black

Click here for more Primer information

Click here for more Putty information

Mix Black Powder, plus Mouldable Epoxy Putty - to give shades of grey to black.

Add Black Colour Powder to make the shade of grey/black required. Smooth with Epoxy Smoothing Spray.

Includes: Packet of Black Colour Powder, 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

Black Epoxy Putty, Kit No. 15 - £63.49 -

Additional 1L Putty - £24.60 -

500cc Additional Primer - £22.47 -

250cc Epoxy Cleaner - £7.67 -

Colouring Powder 50g - black - £2.95 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


16. Stone Repair

Epoxy Primer/Consolidator plus

Mouldable Epoxy Putty

Mixing Mouldable Epoxy Putty

Click here for more Primer information

Click here for more Putty information

Includes: 1 litre of Epoxy Putty, 0.5 litres of Epoxy Primer, Box of 100 Uni Handed Vinyl Gloves, Smoothing Roller.

Stone Repair, Kit No.16 - £60.54 -

Additional 1 L Putty - £24.60 -

500cc Additional Primer - £22.47 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


17. Concrete - Self Leveling Floor Filler - structural, with a smooth surface finish in grey.

Can take fork lift truck traffic.

Self Leveling Epoxy Kit

Self levelling Epoxy Pouring Resin

Click here for more information

Includes: 2.5 litres of Structural Epoxy Pouring Resin, Box of 100 Uni Handed Vinyl Gloves, Mixing Paddle

Self Leveler, Kit No. 17 - £90.73 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Gloves - £13.70 -


18. Gravestone and Garden Ornament Repair Kit

Joins stone and concrete parts together

Slow Set Thixotropic Epoxy Resin

with Epoxy/Glass Bars as dowels

Thixotropic Resin to bond Epoxy Glass dowels into broken gravestones

Thixotropic Epoxy Resin, Slow Set Version, used to bond Epoxy Glass dowels into the edges of broken gravestone headstones.

Click here for more Thixotropic Resin information

Click here for more Bars information

Includes: 2 x 6mm x 1 metre Helical Stainless Steel Bar, 400cc Slow Set Thixotropic Resin, 400cc Cartridge Kit, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves, Extension Tube 8mm x 400mm

Gravestone Repair, Kit18 - £70.09 -

Additional Resin - £31.94 -

250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


19. Cracked Plaster Ceiling and Cornice Repair Kit

Slow Set Thixotropic Epoxy Resin

with stainless steel dowels

Thixotropic Resin to bond Epoxy Glass dowels into broken gravestones

Thixotropic Epoxy Resin, Slow Set Version, used to bond Epoxy Glass dowels through the hollow, loose or detaching ceiling, cornice or decorative plaster parts to re-secure them to the lath above.

Click here for more Thixotropic Resin information

Click here for more Bars information

Includes: 2 x 6mm x 1 metre Stainless Steel Bar, 400cc Slow Set Thixotropic Resin, 400cc Cartridge Kit, Mixing Knife, Box of 100 Uni Handed Vinyl Gloves, Extension Tube 8mm x 400mm.

Plaster Repair Kit - £70.09 -

Additional Slow Set Resin, 400cc - £31.94 -

Epoxy Cleaner, 250cc - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


20. Road Plate Gritting Kit

using Epoxy Seal Coat Clear

Gritted Road Plate - gives wet weather anti slip properties

Click here for more Resin information

Includes: 2.5 litres of Epoxy Seal Coat Clear Resin, 1 x Mixing Paddle, 6kgs of mixed 1- 3mm washed grit 1 x Epoxy Cleaner, 1 x Box of 100 Uni Handed disposable Vinyl Gloves.

Based on a Road Plate 1.2m x 2.4m = 2.9 square metres

Note - Bulk Deal - 40 Kits or more - these exclude the Mixing Paddle, Cleaner and Gloves. Ask for a cost of delivery.

Road Plate Gritting Kit - £113.16 -

40 Kits - Bulk Price - £72.71 each - £2908.40 per 40 -

(Note - there will be a additional charge for a 40 Kit delivery based on quantity and Postcode.)

Epoxy Cleaner, 250cc - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


21. MOT Brake Roller Re Gritting Kit

using non drip Thixotropic Epoxy Resin

Brushing a Brake Roller with Thixotropic Resin

Click here for more resin information

Includes: 2 x 1 litre Thixotropic Epoxy Resin, 1 x Epoxy Cleaner 250cc, 1.5kgs of Alumac Grade 16 Grit.

For Class 4 - 7 Rollers specify Mixed Minerals 1-3 Grit at + £0.40 per kilo.

Covers 1 x Roller 176mm - 208mm in diameter up to 1 metre long = equivalent to 0.65 square metres at 3mm thick.

Roller Regrit Kit - £112.19 -

Box of 100 Gloves - £13.70 -


22. and 23. Potato Peeler Re Gritting Kit

using Thixotropic Epoxy Resin

For resurfacing potato and vegetable peeling machines ('Rumblers').

Potato Peeler re-gritted

Click here for more resin information

Includes:

Kit No. 22 - 28 pound (13kg) Peeler - 1 x 400cc Thixotropic Epoxy Resin, 1 x Epoxy Cleaner 250cc, 2kgs of Alumac 24 Grit.

Kit No. 23 - 56 pound (26 kg) Peeler - 2 x 400cc Thixotropic Epoxy Resin, 1 x Epoxy Cleaner 250cc, 4 kgs of Alumac 24 Grit.

Kit No. 22 - for 28lb Peeler - £43.68 -

Kit No. 23 - for 56lb Peeler - £79.70 -

Box of 100 Gloves - £13.70 -


24. Concrete injection - expanding type resin, low pressure

using Polyurethane liquid, moisture curing

Click here for more resin information

Includes:

Kit No. 24 - 1 x 1 litre Polyurethane Injection Resin, 20 x Plastic Injectors with one way valves for 10mm holes, 5 x Syringes 50cc to fit injectors

Kit 24 for concrete void injection - £41.50 -

Buy more injectors

10 - £1.99 -

100 - £19.87 -

1000 - £198.66 -

Buy more syringes

50cc Syringe - £1.78 -

Box of 100 Gloves - £13.70 -


25. Concrete Hairline Crack Injection

Ultra Thin Epoxy Resin for hairline concrete crack injection

Click for more Information.

Ultra Thin Epoxy Resin

Includes: 225cc of Ultra Thin Epoxy, 1 x Rubber Mixing Pot, 10 x 20cc Syringes, 10 x Needles, 1 x 250cc of Epoxy Cleaning Fluid, 1 x box of 100 Uni Handed Vinyl Gloves.

Concrete Hairline Crack Kit No. 25 - £61.00 - -

Additional Ultra Thin Resin 225cc - £19.86 -

Additional 250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -


26. Stain Seal Blocking coat for plaster

Permanently blocks all stains using a tough Epoxy Gel coating - just paint over once hard.

Ultra Stain Block - Rebuild Resin only requires one coat

Includes: 500cc of Rebuild Resin , 1 x Rubber Mixing Pot, 1 x Plastic Spreader, 1 x box of 100 Uni Handed Vinyl Gloves.

Stain Seal Blocking Kit No. 26 - £43.10 -

Additional 250cc Epoxy Cleaner - £7.67 -

Box of 100 Disposable Vinyl Gloves - £13.70 -



Shopping on our Site is Safe!

When you provide us with any personal information including your name, address, e-mail and credit card number, it is processed over a secure connection on secure servers. We use Secure Socket Layers (SSL) to encrypt all information you provide before sending it to our servers. SSL is the industry standard and the best software available for secure ecommerce transactions.

OUR SHOPPING PAGE

Contact I History I Links I Privacy Policy | Returns Policy I Resins Shop | Technical | References


Property Repair Systems

T: 01626 872886

E: Mail us help@propertyrepairsystems.co.uk


Site written by: David Moore

David Moore, B.A. (Hons.), C.T.I.S., C.R.D.S. Technical Author

Google+


Other Property Repair Systems Sites:

www.drywallandfloor.co.uk - membranes for lining damp walls, floors, basements and cellars

www.fire-door-paint.co.uk - upgrade doors to 30 minutes fire resistance

www.joist-repair.co.uk - how to quickly repair joists and beams of any size

www.propertyrepairsystems.co.uk - our Home Site

www.steel-fire-paint.co.uk - treat steel with Intumescent Paint to provide fire protection

www.timber.org.uk - systems of repair, with step by step methods

www.timber-repair.co.uk - how to repair timber beams