Epoxy Fine Surface Filler

Property Repair Systems is OPEN FOR BUSINESS - 01626 872886

Where you can speak to Timber rebuilding people

Click here for our Home Page




Timber Repair - how to repair timber window frames and cills


1. Cut out all the decay - vacuum to remove dust.

2. Apply Epoxy Primer with a brush.

3. Apply Timberbuild to bring the surfaces to level - smooth with a plastic spreader.

Clicking on a blue Product Name takes you directly to the Shopping Page,

Rebuild Resin in cartridgesRebuild Resin for hand mixingRebuild Resin in pots, rather than cartridges

Mix Timberbuild on a mixing board with a knife.

Click here Go Direct to our Shopping Pages

Thixotropic Epoxy Resin - initial set 30 to 45 minutes - 2:1 hand mix with a spatula


THIXOTROPIC EPOXY RESIN is a two part, solvent free, high strength epoxy resin adhesive.

Thixotropic Epoxy Resin - two gels for hand mixing

Mixing Thixotropic Epoxy Resin - sistinctive colours help to judge when it is fully mixed


For bonding wood pieces into place before applying Timberbuild to level.


- bonds to most masonry and metal surfaces

- waterproof

- high bond strength

- flexible

- easy to mix, equal 2:1 mix ratio, mix only what you need.

- coloured 2 parts means correct mixing every time


THIXOTROPIC EPOXY RESIN gel is supplied in two part packs 400cc or 1000cc. Each pack consists of two separate containers: mix ratio is an easy 2:1. The final colour when set is light buff.

Go Direct to our Shopping Pages

Buy Now for fast Delivery - Nationally, by T.N.T. and UK Mail Carrier.


Apply Epoxy Primer liquid by brush and whilst tacky lay in the putty-like repair mortar, Moldable Epoxy Putty.

Epoxy Primer - available in 500cc and 1 litre, two pot, liquids.

Moldable Epoxy Putty - available in 500cc and 1 litre, two pot, putties.

Cut out cracks to a clean slotMixing Mouldable Epoxy Putty Mortar by handEpoxy Putty in its natural colour

Slot correctly cut out, square shouldered, dust blown out, ready to Prime and Fill. Mixing. Fill cracks and inject Epoxy.

Click to visit our Shopping Pages

Buy Now for fast Delivery - Nationally, by T.N.T. and UK Mail Carrier.

Our products for wood bonding situations:

1. Cracks - grind out, remove dust, apply Epoxy Primer and fill with Moldable Epoxy Putty.

2. Holes - grind out, remove dust, pour in Structural Epoxy Pouring Resin, which will self level.

Let us help you choose the correct solution to your problem - don't waste money on unnecessary treatments or products.



Home | Repair Cracks | Chemical Anchors | Coatings | Repair Concrete | Brake Rollers

Repair Render | Returns Policy | Contact

Property Repair Systems

T: 01626 872886

E: Mail us help@propertyrepairsystems.co.uk

Site written by: David Moore

David Moore, B.A. (Hons.), C.T.I.S., C.R.D.S. Technical Author


Other Property Repair Systems Sites:

www.boron.org.uk - how to use Boron based insecticides/fungicides to treat timber rots and insect attack

www.dampness-info.co.uk - how to treat penetrating dampness in walls and plaster

www.deck-treatment.co.uk - how to treat patio decks and yacht decks

www.dryrot.biz - how to kill Dry Rot in buildings

www.drywallandfloor.co.uk - membranes for lining damp walls, floors, basements and cellars

www.fire-door-paint.co.uk - upgrade doors to 30 minutes fire resistance

www.joist-repair.co.uk - how to quickly repair joists and beams of any size

www.propertyrepairsystems.co.uk - our Home Site

www.steel-fire-paint.co.uk - treat steel with Intumescent Paint to provide fire protection

www.timber.org.uk - systems of repair, with step by step methods

www.timber-repair.co.uk - how to repair timber beams

www.woodworm-info.co.uk - how to kill and prevent woodworm and death watch beetle

www.woodworm-expert-advice-forum.org.uk - all your questions and our answers about woodworm treatment DIY