A three part, (two liquids and a powder) thick pouring resin. Mix using a mixing paddle in an electric drill. For filling holes and, in combination with reinforcement rods, for structural repair of timber and masonry, including concrete. Self levelling, self de-gassing (bubbles of air, trapped during mixing,will rise to the top)

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A hole 300mm x 300mm x 300mm (1ft x 1ft x 1ft) will require 27 litres.

Frequently purchased with this product - Mixing Paddle, 1 litre Cartridge Tube Kit, 1 litre Skeleton Gun.

Structural Epoxy Pouring Resin - £27.80 1 litre, £53.35 2.5 litre, £121.00 7.5 litre, plus VAT

Buy 1 litre of Pouring Resin -

Buy 2.5 litres of Pouring Resin -

Buy 7.5 litres of Pouring Resin -

Buy Mixing Paddle -

Buy 1 litre Cartridge Kit -

A two part, (two gel pastes) thick injection resin. Mix using a pallet knife, by hand. For laminating and bonding materials together. In conjunction with a Cartridge Tube kit, for injecting into slots and holes and, in combination with reinforcement rods, for structural repair of timber and masonry, including concrete. Also used as an anchor resin, to bond rods, studs, bolts and reinforcement into masonry and concrete. This resin does not drip or run - it is similar in consistency to Vaseline or Swarfega.

Usage rate - by volume - 1 litre will fill a void 100mm x 100mm x 100mm (4" x 4" x 4"). A 400cc pack will fill a hole 25mm in diameter to a depth of 800mm. Extension tubes are available, made to order, to reach the base of any hole depth and in varying diameters.

Frequently purchased with this product - Pallet Knife, 400cc Cartridge Tube Kit, 400cc Skeleton Gun, 1 litre Cartridge Tube Kit, 1 litre Skeleton Gun, Vinyl Gloves (Box of 100).

Thixotropic Injection and Laminating Resin - £22.55 400cc, £29.77 1 litre,

Note - both require a Cartridge (at extra cost) if being used for injection, rather than spreading.

Buy Thixotropic Resin - 400cc -

Buy Thixotropic Resin - 1 litre -

Buy Pallet Knife for mixing -

Buy Box of 100 Vinyl Disposable Gloves -

Thixo Rapid is a nozzle mixing two part product for rapid setting injection - 3 to 8 minutes, in a single plastic cartridge. Simply insert into a standard skeleton gun and screw on the mixing tube. Inject gently, like putting paste on your toothbrush, from the bottom of the hole outwards. Can be used for anchors, bolts, studs and stitching in masonry.

Usage rate - 280cc will fill a 10mm x 100mm slot for a length of 280mm (a typical 'stitch' repair would be 1000mm long).

Frequently purchased with this product - 400cc Professional Skeleton Gun, Spare Mixing Nozzles, Vinyl Gloves.

Thixo Rapid Resin 280cc - £14.50 single tube with one mixing nozzle, £0.58 per spare mixing nozzle, plus VAT

Buy Thixo Rapid 280cc -

Buy Spare Mixing Nozzles -

Buy Box of 100 Disposable Vinyl Gloves -

Chemical Anchor Polyester Resin - for hole injection to secure an anchor bolt, bar or threaded bar - , supplied in a dual piston, concentric cartridge. Simply insert into a concentric type skeleton gun and screw on the mixing tube. Inject from the bottom of the hole outwards. Can be used for anchors, bolts, studs and stitching in masonry - suitable for use with steel, stainless steel, aluminium, brick, stone and render.

Usage rate - 380cc will fill 8 x 20mm diameter holes to a depth of 150mm, assuming maximum wastage.

Frequently purchased with this product - 10:1 Concentric Skeleton Gun, Vinyl Gloves, Spare Mixing Nozzles

Chemical Anchor Polyester Resin - £9.85 per 380cc twin tube concentric cartridge, including mixing nozzle, plus VAT

Buy Chemical Anchor 380cc resin -

Buy a Box of 100 Vinyl Disposable Gloves -

Spare Mixing Nozzles -

Concentric 10:1 Skeleton Gun -

Pure Epoxy Resin - for repairs to metal, masonry and wood - supplied in a dual piston, side by side plastic cartridge. Simply insert into a 1:1 ratio skeleton gun and screw on the mixing tube. Inject from the bottom of the hole outwards or spread onto mating surfaces. Can be used for anchors, bolts, studs and stitching in masonry, bonding and laminating - suitable for use with steel, stainless steel, aluminium, brick, stone and render.

Usage rate - 380cc will fill 8 x 20mm diameter holes to a depth of 150mm, assuming maximum wastage. For surface bonding or lamination allow a minimum of 1 litre per square metre, assuming a thickness of 1mm.

Frequently purchased with these products - 1:1 Skeleton Gun, Vinyl Gloves, Spare Mixing Nozzles

Pure Epoxy Resin - £17.86 per 380cc cartridge including mixing nozzle, plus VAT

Buy Pure Epoxy Resin - 380cc -

Buy Box of 100 Vinyl Disposable Gloves -

Buy Spare Mixing Nozzles -

Epoxy Mouldable Putty - 1 litre and 500cc - 1:1 mix ratio - hand mix

Simply take equal portions in gloved hands and mix together, like window putty or bread dough, until a perfectly even colour. Apply with a pallet knife or by hand placing. Repairs wood, brick, stone, concrete, some plastics and bonds most metals. Will set underwater.

Usage rate - 1 litre of putty will fill a hole 4 inches x 4 inches x 4 inches (100mm x 100mm x 100mm).

Frequently purchased with this product - Vinyl Disposable Gloves (Box of 100 uni-handed vinyl)

Epoxy Mouldable Putty - £15.75 per litre, supplied in 2 x 500cc pots, £9.87 supplied as 2 x 250cc pots, plus VAT

Buy 1 litre of putty -

Buy 500cc of putty -

Buy Pallet Knife for mixing/placing -

Buy Box of 100 Vinyl Disposable Gloves -

Epoxy/Glass Bars - cut from 1 metre or 3 metre lengths

Available in 6, 8, 10, 13, 16mm diameters

Zinc Plated High Tensile Steel Allthread - cut from 3 metre lengths

Available in 12, 16, 20, 25mm diameters

Helical Stainless Steel Bar

Available in 6mm diameter, 1 metre or 2 metre lengths. Each 1 metre length will make one typical brickwork or blockwork 'stitch'.

Helical Bar - £4.88 per metre, supplied in 1 metre lengths, plus VAT

Buy Helical Bars - 6mm x 1 metre -

Priced by Telephone to suit your project - supplied cut to length - call 01626 331351

Example of High Tensile Zinc Plated Allthread used to join components inside a repair.

These Cartridge Kits are supplied empty ready to hand fill with our Structural Epoxy Pouring Resin (by pouring) or with our Thixotropic Injection Resin by using the 'pusher plate' supplied with the Kit. The pusher plate drops into the pot containing the mixed resin and allows the open end of the tube to be pushed down into the pot, filling itself as it goes down.

400cc - 250mm/10 inches long tube, with piston and pointed nozzle

1000cc - 250mm/10 inches long tube, with piston and pointed nozzles

Frequently purchased with this product - 400cc or 1000cc Skeleton Gun, Extension Injection Tubes - ring us to discuss your exact requirements

Cartridge Tube Kits - £1.50 400cc tube kit, £3.25 1000cc tube kit, plus VAT

Buy 400cc Cartridge Tube Kit -

Buy 1000cc Cartridge Tube Kit -

You can specify the length of extension tube that you require. They are available in the following diameters: outer tube diameter - 8mm, 10mm and 15mm. (Other sizes - specially made to order).

400cc Skeleton Gun - for injection using UltraCure 400cc and all other products in single tubes, 280cc to 400cc

1000cc Skeleton Gun - Special 1 Litre gun for injection using UltraCure 1000cc or other 1 Litre products.

380cc 10:1 Skeleton Gun - gun for injecting Chemical Anchor Polyester Resin and similar 10:1 concentric twin tube resin cartridges

380cc 3:1 Skeleton Gun - gun for injecting Pure Epoxy Resin and similar 1:1 side by side resin cartridges

Skeleton Gun - £14.50 400cc gun, £24.70 1000cc (1 litre) gun,

Twin Tube Skeleton Gun - £25.00 Concentric tubes, 380cc/10:1 mix ratio, plus VAT

Twin Tube Skeleton Gun - £28.90 Side by side tubes, 380cc/1:1 to 3:1 mix ratio, plus VAT

Buy Skeleton Gun - 310/400cc - single tube -

Buy Skeleton Gun - 1000cc - single tube -

Buy Skeleton Gun - 380cc/10:1 - Concentric single tube, dual piston -

Buy Skeleton Gun - 380cc/1:1 to 3:1 gun, Side by side, dual tube & dual pistons -

Buy Pallet Knife -

Buy Box of 100 Vinyl Disposable Gloves -

Liquid Membranes - waterproof brush on coating, indoors & outdoors

Epoxy Seal Coating - 2.5 litre, 5 litre - colour choice

Waterproofs, seals and provides a tough vapour barrier membrane on concrete, render, stone, brick and quarry tiles. Apply by brush or roller. Pure epoxy - no solvents, no water.

Ultra Epoxy Seal coating is perfect for sealing damp concrete floors, damp screeds, damp slab and tiled floors, to prevent the passage of moisture and moisture vapour.

Can be used to prepare old or new concrete or screeded floors for direct laying of wooden floors. It acts as a complete vapour barrier.

Coverage Rate - up to 2.5 square metres per litre on smooth surfaces.

Colours - Red = RAL3013, Grey = RAL7042.

Ultra Epoxy Seal coating - Clear - £28.35 per 1 litre, £44.76 per 2.5 litres, £77.00 per 5 litres.

Ultra Epoxy Seal coating - Red or Grey - £28.35 per 1 litre, £47.60 per 2.5 litres, £89.60 per 5 litres.

Buy Epoxy Seal Coating Clear - 5 litre -

2.5 litre -

1 litre -

Buy Epoxy Seal Coating Red - 5 litre -

2.5 litre -

1 litre -

Buy Epoxy Seal Coating Grey - 5 litre -

2.5 litre -

1 litre -

UV Resist Clear Coating - Polyurethane Based - use indoors and outdoors - one pack

Ultra UV Resist coating is perfect for sealing damp concrete floors, damp screeds, damp slab and tiled floors, to prevent the passage of moisture and moisture vapour.

Can be used to prepare old or new concrete or screeded floors for direct laying of wooden floors. It acts as a complete vapour barrier.

Coverage Rate - up to 5 square metres per litre on a smooth surface

Ultra UV Resist Clear coating - Clear - £18.65 per 1 litre, £46.88 per 2.5 litres

Buy UV Resist Clear coating - 1 litre -

Buy UV Resist Clear coating - 2.5 litre -

Primes and consolidates timber, concrete, brick stone and render.

Provides a secure bond on wood, metal, concrete, render, stone, brick and quarry tiles. Apply by brush or roller. Pure epoxy - no solvents, no water. Apply the repair resin (e.g. Mouldable Putty) into the repair while the Epoxy Primer is still tacky.

Usage rate - allow between 1 square metre per litre (rough surfaces) and 2.5 square metres per litre (smooth surfaces)

Colours - Clear - other colours to Order

Epoxy Primer/Consolidator - £16.50 500cc, £25.05 1 litre, plus VAT

Buy Primer/Consolidator - 500cc -

Buy Primer/Consolidator - 1 litre -

Buy pallet knife for mixing - - Buy box of 100 disposable gloves -

For repairing cracks in masonry and concrete.

The Kit contains: 10 x 1 metre lengths of Helical Bar, 3 litres of W60 Flexi Grout, Injection Applicator Gun, Pointing Tool and Mixing Paddle.

Usage rate - will form up to 10 x 1000mm horizontal stitches in brickwork, for example

Complete Crack Repair Stitching Kit - £96.50 - complete Kit, plus VAT

Buy Crack Repair Kit -

For repairing timber beams, lintols, rafters, tie beams, carrier beams, joists and bressumers. These bespoke beam kits contain a new, laminated structural timber, made in kiln dried wood to C24 Grade or higher, fitted with connector bars made from zinc plated 8.8 Grade High Tensile Allthread bar. Pouring or injection resins are also included.

Engineering - free Design, Method Statement and Tools List (Hire available).

Frequently purchased with this product - additional Structural Pouring Resin

£ POA - price on application, Free Quotation - call Angela or Andy on 01626 331351

.